Welcome to the SeeMeCNC Community

That seems to be the general consensus that my cables are wrong. I took the LCD interface board off the Rambo and double checked that I believe I aligned the pins properly. Cables A and B appear to be oriented correctly as well. I removed them and replugged them on both the PCB and the LCD. This did...

Has anyone else encountered a problem when trying to get the software onto the Rostock Max v2. I have finally completed the assembly and put all the wiring harnesses onto the Rambo board. I have the Arduino application n my computer and USB cable is in place. I ran the EEPROM-clear program. When I u...

All the positive posts about Rostock Max v2, not requiring much or any recalibration is very reassuring. I would think that moving the machine around from place to place could get it out of alignment. Any precision instrument is sensitive to moving.

Is the Rostaock Max v2. working for you still? Does it require continuous recalibration? I am thinking of getting the kit and would like your opinion on how it has performed for you.
Thank you.

Hi everyone, I am planning to place my order this week for the Rostock Max v2. DIY kit. In looking at the filaments to purchase I noticed the T-Glase in addition to PLA and ABS. Has anyone printed projects in T-Glase? Does it go through the print head well? Any problems with jamming? Quality of prin...

Wow, I really appreciate all the great suggestions. Fan upgrades and don't use a cheapo soldering iron. Good point on being generous with the Kapton tape wrapping on the hot end assembly. Being generous with the Permatex silicone application would seem to be good also. Amazon sells the Kapton tape a...

Hello to everyone and Happy New Year. After looking around for a 3D printer for over a year i have decided on the Rostock max v2. I am just about ready to order the kit. Any tips on the soldering would be appreciated. I will buy a new soldering iron for the project. is it best to use thin solder lik...