Welcome to the SeeMeCNC Community

hello friends. Some time ago my win 10 crashes. I'm installed it again. I'm not remember when I install mattercontrol maybe this happened 5 y ago with win7. But it worked fine on my old win10 install. But now I can see only "Status: Invalid printer responce" after i try push the button con...

I have a big model.
Look like hafl a cirlce, like half moon.
Metter Control put it based on a center.
I try to move it. Push the Save button and get nothing.
Moving doesn't save.
Something wrong?

i'm finish print with slow motion speed. But get a Oozing and little bubbles on upper side

for memories

connected to computer

When I push the power on a rambo board
yellow diode flashing , marked as TR.
Is this ok ?

little different. I'm searched the problem and change stock hotend to E3D. Now I'm printing with 0.4 nozzle , before this I'm use 0.5 and get succesfully printing more then 10 times without any trouble. If you read what I'm write. I'm tried change speed to 50% and get some problem. Each time I'm pri...

How much bigger model? Is it lifting on the corners? What travel speed are you using? Are the motors getting uncomfortably hot to the touch? Which motors are they and what current do you have set? It's doesn't matter. i print this model before many time with little different details. model have a c...

test cube have a 40X40X40 mm. Printed in excellent quality.
I have a trouble with big model, started after 12 mm height.
Maybe longer working time make stepper hotter, and get errors.
But I dont know how to check this.

I'm assembled pulley with special glue.
Checked, everything all right.
all set screws in a right place

Last 10 days I have a trouble, Layer Shifting with my MAX2. :cry: I can print test cube easy. Everything fine. But with bigger model I get a Layer Shifting , very accurate , after 50% of print. I checked everything. belts and carriage. And cant find a problem. :oops: Maybe one stepper die ? How to c...

Near 140

I'm talking about this upgrade

[img]https://cdn.shopify.com/s/files/1/0276/ ... 1438697840[/img]

Hi guys.
Who already make upgrade to Cheapskate Carriage.
Can you write me your horizontal radius ?
How I see radius much more, but I dont know how much

DeltaCon wrote:

darkjorik wrote:I have a Layer Shifting. I'm think trouble with moving speed.

So why do you post irrelevant pictures of nozzles that are not even your own?
.

Because E3D nozzle have a bigger contact area with layers.
More friction when nozzle moving

I have a 1850 / 3000 / 35 too

He did say that installed a v6 hotent, but I think that he can't explain himself very well. The problem seems to be scars on top of the surface and the print being pushed away by the hotend. All of the problems related to the nozzle. Check this guide https://www.simplify3d.com/support/print-quality...

I'm installed E3D V6 . Looks like I have a trouble with E3D nozzle. e3d nozzle different than stock nozzle [img]http://i.ebayimg.com/images/g/mRIAAOSwFqJWmUbQ/s-l1600.jpg[/img] [img]https://cdn.shopify.com/s/files/1/0276/2543/products/IMG_1410_large.jpg?v=1382543478[/img] e3d nozzle have a different...

How you can see EZ Groove Adapter have a 4 screws.
I'm use 2 and don't know what to do with 2 others

[img]https://cdn.shopify.com/s/files/1/0276/ ... 1382621154[/img]

where is I can found instructions for this upgrade ?

I'm shocked.
Just finish last printing without a glue for first layer.
Only pure glass plate and PLA filament.
Usually each time, I'm use glue or duct tape for a first layer.
Maybe this is a special PLA ?
Guys can you write me any other filament what I can use without glue ?

I'm serious.
It's not a humor

It doesn't good for flex filament.
Maybe some one have a success story ?

I'm cleaning hot end many time with my old underwear.
It helps me every time

I have some trouble like this with Ninjaflex. Everytime

I found the problem , the nozzle unscrewed.
So I'm scrfewed the nozzle and everething fine now