Search found 52 matches
- Sun Jun 14, 2015 7:25 pm
- Forum: Troubleshooting
- Topic: Rostock Max stops during print "Cannot connect to printer"
- Replies: 3
- Views: 3250
Re: Rostock Max stops during print "Cannot connect to printe
I removed the acrylic panel on the side of the enclosure and aimed a small fan directly at the rambo board - problem solved.
- Sun Jun 14, 2015 6:34 am
- Forum: Troubleshooting
- Topic: Rostock Max stops during print "Cannot connect to printer"
- Replies: 3
- Views: 3250
Re: Rostock Max stops during print "Cannot connect to printe
Yes, Sorry I should have provided that information in my original message. Using the SD card exhibits the same mid-print freeze-up problem.
- Sat Jun 13, 2015 7:44 pm
- Forum: Troubleshooting
- Topic: Rostock Max stops during print "Cannot connect to printer"
- Replies: 3
- Views: 3250
Rostock Max stops during print "Cannot connect to printer"
Any ideas or similar experiences to share? The problem I am seeing is that the printer stops mid-print. If I try the same file it stops at various stages and never in the same place. Mattercontrol says it has stopped working and if I restart it cannot connect to the printer. A restart is required to...
- Sat Jun 13, 2015 7:10 pm
- Forum: What are YOU making?
- Topic: My Rostock max is a workhorse
- Replies: 1
- Views: 2670
My Rostock max is a workhorse
I work 9 hour days but whn I get home my Rostaock max is printing its ass off. Evenings, weekends, and the occasional overnight build. I have acquired an enormous wargaming army, ony of a fraction of it shown here: https://www.thingiverse.com/BeilmanDesign/makes" onclick="window.open(this....
- Fri Feb 06, 2015 11:58 am
- Forum: What are YOU making?
- Topic: Ho Slot Car Body
- Replies: 3
- Views: 3311
Ho Slot Car Body
I think I am asking too much from my Max 2. I drew the body in solidworks so it is a viable stl file. ABS, 2mm layer height.
- Thu Jan 08, 2015 12:08 pm
- Forum: Rostock MAX v2
- Topic: Rostock Max V2 Shutting Down on Heatup UPDATE
- Replies: 52
- Views: 30456
Re: Rostock Max V2 Shutting Down on Heatup UPDATE
I had to finally purchase a more powerful power supply: http://www.corsair.com/en-gb/cx-series-cx750m-modular-atx-power-supply-750-watt-80-plus-bronze-certified-modular-psu" onclick="window.open(this.href);return false; It is able to supply 62amps to the +12V. Once installed (had to mount ...
- Thu Jan 08, 2015 11:58 am
- Forum: Parlez-vous français
- Topic: Rostock max v2 en france
- Replies: 7
- Views: 26468
Re: Rostock max v2 en france
thanks. what about the weird z-axis behaviour, impossible to calibrate outside the triangle made by the towers ? I know it exists but it hasn't been an issue for me. There is strong support on the user forums which is a definite plus for this machine. There is a topic on the Z-axis issue. Have a lo...
- Wed Jan 07, 2015 6:58 pm
- Forum: Parlez-vous français
- Topic: Rostock max v2 en france
- Replies: 7
- Views: 26468
Re: Rostock max v2 en france
Yes. It is very easy to mount the E3D V6. It is an excellent choice for use with the Rostock Max V2. Use the online assembly instructions at the E3D website.Cedric_K wrote:est-ce qu'il est très facile de monter un E3D v6 en lieu et place ?
- Tue Jan 06, 2015 7:08 pm
- Forum: Troubleshooting
- Topic: Bed Adhesion - I'm at my wits end
- Replies: 7
- Views: 5587
Re: Bed Adhesion - I'm at my wits end
Eaglezsoar wrote:Printing a brim around the part may help to adhere it to the print surface.
Yup a brim, or if you are using mattercontrol use a raft. It works magic on my problem parts. Read this: https://www.matterhackers.com/articles/ ... ith-a-raft" onclick="window.open(this.href);return false;
- Sun Jan 04, 2015 5:44 am
- Forum: Troubleshooting
- Topic: CAN'T GET RIGHT
- Replies: 13
- Views: 8165
Re: CAN'T GET RIGHT
When I see a model on thingverse and it does not have a photo of an actual completed part I am wary of it. I have tried my share of these with not much luck. Many have had build issues or I just could not get them to build. There is a low poly version here: http://www.thingiverse.com/thing:319413&qu...
- Fri Jan 02, 2015 1:22 pm
- Forum: New Member introduction
- Topic: Hey All! Just introducing myself!
- Replies: 10
- Views: 7256
Re: Hey All! Just introducing myself!
You certainly can. It looks like you can buy the printed parts for $40 at their store but make 'em yourself.
- Fri Jan 02, 2015 7:17 am
- Forum: Slic3r
- Topic: Whooo Hooo !! Changing Temp during printing
- Replies: 1
- Views: 4364
Re: Whooo Hooo !! Changing Temp during printing
Thanks for the tip. Never thought of that.
- Fri Jan 02, 2015 6:51 am
- Forum: New Member introduction
- Topic: Greetings from Maryland
- Replies: 10
- Views: 6917
Re: Greetings from Maryland
I will buy a new soldering iron for the project. is it best to use thin solder like 0.3 or 0.6 mm for the connections? I used a 40 watt soldering iron and 22ga solder successfully for all connections with my recent build. Good luck & keep the questions coming. The guys here were a fantastic ass...
- Fri Jan 02, 2015 6:43 am
- Forum: New Member introduction
- Topic: Hey All! Just introducing myself!
- Replies: 10
- Views: 7256
Re: Hey All! Just introducing myself!
I forgot to mention I'm printing on a RS Max v2. So my question is though using Repetier Host the default bed size is 150x150. What is the true bed size, or most commonly used for the largest bed size? I just completed my Max about 3 weeks ago and had the same question. I use 280 X 280. Great work ...
- Sat Dec 27, 2014 2:06 pm
- Forum: Troubleshooting
- Topic: PLA melting at EZStruder ? Cool it!
- Replies: 2
- Views: 3106
Re: PLA melting at EZStruder ? Cool it!
I had the heat sink laying around but this would work: http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2150942_-1" onclick="window.open(this.href);return false; And because I did not know I would need a fan up there I did not have a 5 volt wire pair up there. I used a w...
- Fri Dec 26, 2014 9:47 am
- Forum: Troubleshooting
- Topic: PLA melting at EZStruder ? Cool it!
- Replies: 2
- Views: 3106
PLA melting at EZStruder ? Cool it!
My EZstruder stepper was getting so hot it heated the hobbed gear and caused the PLA to become so soft it could not feed itself. This caused several jams. Pla meltdown 2.jpg I added a heat sink (with Artic Silver polysynthetic thermal compound - used for pc cpu's) & 5 volt fan to cool things dow...
- Mon Dec 22, 2014 8:17 pm
- Forum: Rostock MAX v2
- Topic: Rostock Max V2 as first 3d Printer
- Replies: 7
- Views: 6099
Re: Rostock Max V2 as first 3d Printer
- What about this 'disappering purple' glue stick that is mentioned in the manual? Do i really need that special kind? What is it for? I'd rather see if i could improvise something than order a 25$ gluestick over ebay. What does it do that a simple 40 cent gluestick can't do? I use the purple but i...
- Mon Dec 22, 2014 8:02 pm
- Forum: Troubleshooting
- Topic: What is the bed size for Rostock Max 2
- Replies: 1
- Views: 3425
What is the bed size for Rostock Max 2
Since mattercontrol updated to 1.2.1 file I create in Solidworks are not coming in to scale. I noticed the bed size is 150 x 150 with a build height of 350 (& circular bed). What do you gents using mattercontrol have as a bed size?
- Fri Dec 19, 2014 7:39 am
- Forum: Troubleshooting
- Topic: Help Needed - New Build: Power Issues Part 1
- Replies: 6
- Views: 5214
Re: Help Needed - New Build: Power Issues Part 1
I have purchased and installed a Corsair CX750M power supply. It worked like a champ to power my machine and all heats come up rapidly. I highly recommend something of this size & quality for all new Max 2 kit builders. http://www.corsair.com/en-gb/cx-series-cx750m-modular-atx-power-supply-750-w...
- Wed Dec 17, 2014 8:01 pm
- Forum: Troubleshooting
- Topic: Help Needed: Arm Z height calibration
- Replies: 3
- Views: 3499
Re: Help Needed: Arm Z height calibration
Thanks very much. I did not know the z-axis position was reported on the lcd screen but I discovered it.
- Wed Dec 17, 2014 7:46 pm
- Forum: Troubleshooting
- Topic: Help Needed: Arm Z height calibration
- Replies: 3
- Views: 3499
Help Needed: Arm Z height calibration
I just now calibrated my z height in the middle of the bed. The manual (page 239) is telling me to: Click the “Home All” icon on the Movement Controls and then stick a sheet of paper under the nozzle, just like you did when setting the Z height. Approach the zero point 1mm at a time by clicking on t...
- Thu Dec 11, 2014 4:50 pm
- Forum: Troubleshooting
- Topic: Help Needed! - New Build: Power Issues Part 2
- Replies: 6
- Views: 4915
Re: Help Needed! - New Build: Power Issues Part 2
If you cut your main atx connector off be sure that you connect the brown wire to any orange wire. It is needed to prevent the issue I noticed in the 1st line above. JJ at SeeMeCNC alerted me to this and now all is well.
- Thu Dec 11, 2014 6:33 am
- Forum: Rostock MAX v2
- Topic: Rostock Max V2 Shutting Down on Heatup UPDATE
- Replies: 52
- Views: 30456
Re: Rostock Max V2 Shutting Down on Heatup UPDATE
Received my replacement Diablotek 600W from SeeMeCnc. It had some internal short shorts in it that I could see and repair. But still will not allow the lcd to stay on for more than a second or two. Have a look at the image I posted here: http://forum.seemecnc.com/viewtopic.php?f=37&t=7056" ...
- Wed Dec 10, 2014 8:34 pm
- Forum: Troubleshooting
- Topic: Help Needed! - New Build: Power Issues Part 2
- Replies: 6
- Views: 4915
Re: Help Needed! - New Build: Power Issues Part 2
I opened up the power supply and found some bridging across the ac input contacts. I cleaned this up and separated all the component leads that seemed to be touching. The p/s still will not stay on.
- Wed Dec 10, 2014 8:16 pm
- Forum: Troubleshooting
- Topic: Help Needed! - New Build: Power Issues Part 2
- Replies: 6
- Views: 4915
Re: Help Needed! - New Build: Power Issues Part 2
Checked everything & was very careful when installing psu #1 and #2