Welcome to the SeeMeCNC Community

I have taken it down and now I have it running on a Raspberry pi 2 and it is now perfect. Still have to get the camera working, I have a medical thing to do first and then

http://www.raspberrypi.org/raspberry-pi-2-on-sale/" onclick="window.open(this.href);return false;

4 to 6 times faster

Thought you may be taking the chance with the new one.... I have got one on order too...

Windows 10 will be good as well when it is available, this should be a pretty good jigger to play with

Raspberry pi version 2 is out, it is 4 times faster!!

I have ordered one to have a fiddle with, supposedly going to be compatible with Windows 10 version and a Ubuntu as well... Lots more power than the present ones...

I'm in vic.... Not much help... But if you have trouble finding someone I can give you some help...

I did a print job completely by remote this morning. I had to go shopping so I setup a job and made the gcode file, I then imported the gcode to the beaglebone and told it to print. Went down to the shops and took the iPad and when the jobs was done it sent a message to mail system that the print jo...

I have installed it on Beaglebone Black and it is looking very nice.

I had 0.50.3 it first and had not quite got it configured completely. The newer version seems to be working well so far and I think I have got it fairly well set up.

I have just put Repetier-Server on it and it is going well, still configuring at present and getting some more networking hardware.

It is only beta at the moment but looks pretty good so far.

Just as well you're still around

I have been busy as usual, that much to do and I don't know where to start.... Haven't got the second extruder going yet, too many print jobs to do current project is a Beaglebone Black with a 4.3" Cape that I am learning to program

At this stage it will be the Rambo board. I had it running with raspian on the pi and video was woeful. I got the BBB today and I have successfully ssh'd to it and I am currently doing a bit of reading and deciding whether I install Angstrom or put the latest Debian because they now come with that n...

I have not started doing anything with it yet, the hardware is on the way though.

I think the plan will be to install the angstrom version and carry on from there. If you are familiar with BBB and would like to help, please chime in

I just loaded OctoPrint on a BBB I recently picked up. My RPi has been having a bunch of "weirdness" - slow/not responsive, network connection dropping, etc. I'm wondering if my Octoprint one is just dodgy - I have another Pi running XBMC in the living room so I can watch MLB.tv and keep ...

Well I am waiting for a powered hub, I have had a few crashes and all it may be is weak power from the USB port. So for now it is back to the Mac and repetier host....

I followed bubbasnow's great write up and made the changes to do this from a Mac. I don't think it requires as much extra/3rd party software installation via OSX. I followed mhackney's and bubbasnow's guides and it all works very well. I will have to get a powered hub and see if it makes any differ...

Well done we know how you feel

Looks like a pretty good case design

I have tried astroprint and octoprint with the pi and I would not mind trying yours when you get around to placing something online

No rush, printing is still fine with stock hotend :) I can just keep looking over at the E3d and wipe the drool every now and again :D What is preferred by everyone? 3 squirrel fan on the sides or 1 bigger fan with a duct surrounding the hotend? I will be going for the single duct and a bigger fan,...

I'm playing around with the latest one and the Pi camera..

Just got to wind the speed back a bit, still at normal speed at the moment and didn't quite finish the first print!

Well done

What am I doing with it now? Give you a hint..... image.jpg McSlappy the extruder arrived today :) I have been playing with mattercontrol, that item was sliced with sli5er and the whole job done with the latest Mac version of MC. It is starting to look good now that it works. I have also printed the...

New beta's available, you need to have pro licence for them to work....

Includes Mac and Linux...

https://www.dropbox.com/sh/3evahzu5gfel ... FeGZa?dl=0" onclick="window.open(this.href);return false;

Nice looking design! I really love the Reuleaux triangle cut out. http://en.wikipedia.org/wiki/Reuleaux_triangle" onclick="window.open(this.href);return false; I just loaded up my pi with Astroprint yesterday. (had trouble getting octoprint to work, so am trying Astroprint... so far it is...

This is my result, 1:42 print time. Overall happy with fit and finish, messed around with duct for layer fan so as not to be close/blow on heater block. Using 1/8 inch dowel to hold things in place. O.A.L. ended up at close to original due to the fact I wanted to print this as one piece using the o...

That's the one, I was trying the pink one

They look terrific.....

Thanks,

That was the power wires from the fan right?

Black and yellow to have 12 volts applied to them, I know there are other colours but we don't need them!