Welcome to the SeeMeCNC Community

Do you know which version of Cura that was exported from? I'm trying to get local slicing in OctoPrint to work and am struggling with getting a functional Cura profile for the Max V2. The Cura engine in OctoPrint requires using V15.04 or earlier due to profile file format changes.

Thanks for the correction - You're right, "Hanger Iron" seems to be a much better search term (Home Depot calls it "Hanger Strap"). Looks like the going rate is $3-$4 for 10ft (Lowes was $3). I just had a big roll lying around anyway since I'd been using it for other projects. I ...

I thought I'd post my quick & dirty thermal barrier mod for the Rostock. It's helped quite a bit in terms of minimizing issues with drafts and the interior temp seems to run ~10 degrees warmer. YMMV based on materials. Anyway, it's a shower curtain, some metal perforated strip (often called &quo...

This is just cruel and unusual punishment on the Bowden extruder. It has to retract a bit between each move between character legs. Sounds like a pneumatic nail gun. There's definitely a bad corner to the print, I'm guessing one of the cassettes is sloppy.

I'll be trying to print the Tower of Pi http://www.thingiverse.com/thing:271769 Today (6/8).


Live stream from Dropcam: http://dropc.am/p/rostock

It's a 13hr print, here's to hoping it doesn't screw up!

That's the problem with me and printed stuff, I always check out the pictures and never get to the articles.

Good catch, Polygonhell - I did go back and re-bend the wires to not touch, as well as scraped away the few bits of solder left that had flowed over the RTV. The fan shroud also acts as an insulator, so I'm less worried about shorting out.

After my 2nd print, I saw something on the heated bed I didn't expect - a blob of metal... [img]https://lh4.googleusercontent.com/-VW3KkBzXiYI/U4tSZjJ8VPI/AAAAAAABg7g/hs8rzr0Y8nM/w491-h872-no/IMG_20140601_091747.jpg[/img] WTF? I'm not *that* sloppy with my soldering iron, where the heck did that com...

After what I thought was a spectacularly easy build (only 1 trip to the parts store and no blood sacrifice - a bad sign, to be sure)... I should have figured something was wrong when I finished my first print of the shroud. [img]https://lh6.googleusercontent.com/-ApcKBtauMFA/U4tU6o1UyoI/AAAAAAABg8w/...

Woot! Built the Rostock is just over a 3 day weekend - Got a little hung up due to incorrect wiring (I think I was actually missing some), but other than that, the build was awesome. Excellent tuning instructions - printing my first print (the fan shroud) now.

Thanks guys!

Thanks! Most of the pain with the Mendel is that there's so many variables (extruder from one source, hot head from another, X motor type, etc) that it's hard to get it all dialed in. With the Max, it's all same-sourced, so the tips/tweaks/values should be a lot more consistent.

Checking in from Beaverton. I picked up a Rostock Max at the Maker Faire in San Mateo. I've been futzing around with 3D printers since day 1 (or close to it) starting with trying to make something called at McWire out of pipes and lucite. That ended up being a total disaster, but hugely educational ...