Welcome to the SeeMeCNC Community

Hi, using Win7 and the grbl by mhackney, I managed to control the machine with the Univeral Gcode Sender (I aslso add a jumper that I had to remove) The setting I used are: $0=10 (step pulse, usec) $1=200 (step idle delay, msec) $2=0 (step port invert mask:00000000) $3=0 (dir port invert mask:000000...

I am in the same situation Gene described. I can interact with the grbl (using Arduino Serial monitor) but I cant seem to be able to connect to him with nor the repetiter or the Creation Workshop with the Creation workshop I dont get any response. with the Repetier when I connect says: 13:34:32.471 ...

I think it more likely that most people are still struggling with PLA and ABS and most printers are not capable of printing other materials. unfortunately there are more Rep2 then Rostock and Orion out there...

What about t-glase (PET), from my experience it has no warp issues.
Anybody knows what is its thermale expansion coeeficent?

all three Taulman nylons should be printed well on the stock hot end of Rostock Max v2. the suggested temp by Taulman3D are 242 Celsius degrees for the 645 and the Bridge Nylons and 245 Celsius degrees for the 618. Those degrees are suggested for a hot end such as the MK7, as the SeeMeCNC has "...

Misused names (my mistake)
so from your experience the layer fan should be used for abs bridging?

Hi all,
Fan while bridging.
the Abs slic3r printing profile for ABS includes automatic usage of the peek fan which actually turn it on when bridging,
From initial prints I made it looks that it improve the bridge.
What is your experience?