Search found 301 matches

by enggmaug
Sat Jan 20, 2018 8:53 am
Forum: RostockMAX v3
Topic: Trouble installing an E3D v6
Replies: 6
Views: 5770

Re: Trouble installing an E3D v6

Have you checked the Max Temp setting in your Firmware ?
by enggmaug
Mon Jan 08, 2018 3:43 pm
Forum: Mods and Upgrades
Topic: Arms repalcement - best option ?
Replies: 3
Views: 5427

Re: Arms repalcement - best option ?

Thank you Geneb. I was expecting this reply somehow.

Well, I suppose my wife won't be happy...

Geneb, by the way, If I follow your advice, shall I also replace the platform, or could I keep my old one ?
by enggmaug
Fri Dec 29, 2017 5:18 pm
Forum: Mods and Upgrades
Topic: Arms repalcement - best option ?
Replies: 3
Views: 5427

Arms repalcement - best option ?

Hello, I own a modified V1. One of the modifications was for the CF arms from TrickLaser. I have the old gen, with rubber band and traxxas balls. One of my Traxxas rotule has some play, and I bought a bag of 10 for replacing it. However, I do wonder, considering I have the original V1 cheapstakes Wh...
by enggmaug
Sun Nov 19, 2017 3:16 pm
Forum: What are YOU making?
Topic: Watch Winder (could use some expertise on code)
Replies: 2
Views: 3712

Re: Watch Winder (could use some expertise on code)

What do you mean "some issues" ? I don't want to open your code if I don't know what I'm looking for... Did you deal with rebounds ? some rotary encoders bounce alot. Last time I used one, I had to add a low pass filter (capapacitor and resistor) to kill them rebounds before entering the a...
by enggmaug
Tue Oct 10, 2017 5:45 am
Forum: Troubleshooting
Topic: Sudden Layer Shift
Replies: 10
Views: 7779

Re: Sudden Layer Shift

I believe your belt slipped on the X tower.

Probably your hot end encountered more resistance than usual in one spot (maybe due to the lifting of your printed part) and the x belt slipped by one tooth or the motor skipped some steps.
by enggmaug
Wed Jun 21, 2017 1:05 pm
Forum: New Member introduction
Topic: New member from France, SKULL FRANCE
Replies: 2
Views: 3453

Re: New member from France, SKULL FRANCE

Salut François and welcome,

I'm Guillaume ;) - proud owner of a modified V1.

Where about do you live ? What does the Skull Brand produce ?
by enggmaug
Wed Mar 29, 2017 4:28 pm
Forum: Duet
Topic: Duet Ethernet is coming
Replies: 6
Views: 7017

Re: Duet Ethernet is coming

Good !

I would have been curious to see new features, but I will be completely satisfied with a well proven design.
by enggmaug
Wed Mar 29, 2017 11:07 am
Forum: Duet
Topic: Duet Ethernet is coming
Replies: 6
Views: 7017

Duet Ethernet is coming

Seems like the ethernet version of the duet is coming soon (end of month or beginning of April).

I can't wait ! Lack of Ethernet is what actually kept me from buying the DuetWifi.

I wonder if the new board will also improve in some other aspects ?
by enggmaug
Mon Jan 23, 2017 1:57 am
Forum: RostockMAX v3
Topic: Simple Question
Replies: 6
Views: 5106

Re: Simple Question

the PTFE is the one in the top of your second pic... ? I did dont read much about HE280, so I'm not sure, but I reckon it is a PTFE sleeving, that should be shorten to the right length... Anyway, Just to make sure, measure the outter section of the clear tube at the top of your last pic... it should...
by enggmaug
Tue Jan 17, 2017 5:13 pm
Forum: Troubleshooting
Topic: Heatspreader multiple layers
Replies: 11
Views: 7757

Re: Heatspreader multiple layers

How did it go ? Did you sell them yet ?
by enggmaug
Tue Jan 17, 2017 4:12 am
Forum: Troubleshooting
Topic: I could use some purchase advice/help.
Replies: 15
Views: 10519

Re: I could use some purchase advice/help.

Hey Edwii, What I could say after everyone has given his point of view, is that whether you keep Rambo or take Duet from the begining depends on your skills to understand technical things. I understand you are new to 3D printing. So was I when I bought my RMax V1 in 2013. I started with a delta, and...
by enggmaug
Sun Jan 08, 2017 10:28 am
Forum: RAMBo
Topic: Rambo Cool Project ?
Replies: 3
Views: 5361

Rambo Cool Project ?

I am thinking about taking the leap to the duet. Before I do so, I'm trying to see where my beloved Rambo will end up. Sell it back ? Boring. Keeping it in a drawer ? Worse. Make another printer ? 1 is enough to me. Maybe a plotter, a laser cutter, or ... ? Do you guys have any idea ? Any link to sh...
by enggmaug
Mon Dec 19, 2016 8:20 am
Forum: RostockMAX v3
Topic: OctoPrint plugin...
Replies: 46
Views: 26923

Re: OctoPrint plugin...

Until now, I used the opendact tool. It is not perfect, very buggy, but it does the job, and it does calculate tower rotation and more. I'm trying to get this pluggin to work, because I use Octopi, and I don't want to keep changing USB from pi to PC and then back. (And because the community says it'...
by enggmaug
Fri Dec 16, 2016 3:59 am
Forum: RostockMAX v3
Topic: OctoPrint plugin...
Replies: 46
Views: 26923

Re: OctoPrint plugin...

Are the values in X and Y consistent with the XY position you placed the effector at before calling G30 ?
by enggmaug
Fri Dec 16, 2016 3:50 am
Forum: Troubleshooting
Topic: Heatspreader multiple layers
Replies: 11
Views: 7757

Re: Heatspreader multiple layers

Thanks, I'll look into that.
by enggmaug
Thu Dec 15, 2016 4:39 am
Forum: Troubleshooting
Topic: Heatspreader multiple layers
Replies: 11
Views: 7757

Re: Heatspreader multiple layers

I live in France, and own a V1.
How much would you charge for selling me a couple ?
by enggmaug
Wed Dec 14, 2016 1:01 pm
Forum: RostockMAX v3
Topic: OctoPrint plugin...
Replies: 46
Views: 26923

Re: OctoPrint plugin...

Just take a look at the JavaScript source code. The bit you're after is currently looking for "PROBE-ZOFFSET" - just change this to deal with whatever your firmware outputs when the z hit happens. I don't know how "normal" Repetier behaves. The only printers I have FSRs on are e...
by enggmaug
Mon Dec 12, 2016 3:35 pm
Forum: RostockMAX v3
Topic: OctoPrint plugin...
Replies: 46
Views: 26923

Re: OctoPrint plugin...

Gene, I know you as THE "manual guy", and I recognize your talent in writting up documentation. Would you mind giving basic architecture/design description for this pluggin ? It would really help me to try porting this for FSR setup on my V1.... whenever I have time for it. (man, so many p...
by enggmaug
Sun Dec 04, 2016 11:33 am
Forum: RostockMAX v3
Topic: OctoPrint plugin...
Replies: 46
Views: 26923

Re: OctoPrint plugin...

geneb wrote:it'll only work with the HE280 and Repetier Firmware.
Both in short and long term ? How much of an effort would it be to port it for repetier with FSR setup ?
by enggmaug
Sat Dec 03, 2016 4:54 pm
Forum: RostockMAX v3
Topic: OctoPrint plugin...
Replies: 46
Views: 26923

Re: OctoPrint plugin...

My googleing did not return anything interresting.

The Octopriny pluggins seach neither.

Can you please share a link ? I'm also eager to give this a try with my FSR setup.
by enggmaug
Sun Oct 16, 2016 5:01 am
Forum: KISSlicer
Topic: Bed STL Model
Replies: 6
Views: 7062

Re: Bed STL Model

So, as I see it, it is just for display.... you could actually load the STL of the entire printer, as long as the build plate center is at (0, 0, 0).. Am I right ?
by enggmaug
Sun Oct 16, 2016 4:53 am
Forum: KISSlicer
Topic: Bed STL Model
Replies: 6
Views: 7062

Re: Bed STL Model

Thank you very much !
And my desktop is highly organized!
I don't doubt it... I was just kidding, so that you'd wonder if I can actually see it...
by enggmaug
Sat Oct 15, 2016 4:47 am
Forum: KISSlicer
Topic: Bed STL Model
Replies: 6
Views: 7062

Re: Bed STL Model

Okay, I hope I did not scare you too much.... :roll:

that was just a joke... you shared your KiSlicer settings, in another thread.... and I read the path for the file in the settings there.... 8-)

;)
by enggmaug
Sat Oct 15, 2016 4:45 am
Forum: KISSlicer
Topic: Bed STL Model
Replies: 6
Views: 7062

Bed STL Model

Hi all, KisSlicer's manual says it's better to use a STL file for the bed shape... but it does not say what to draw in the STL file. Can anyone share his/hers, or tell me what to draw ? Is it just a flat round ? cylinder ? Does it show the 3 columns ? How to tell KisSlicer what surface to print onto...
by enggmaug
Thu Sep 22, 2016 4:27 pm
Forum: OctoPrint
Topic: GPIO
Replies: 7
Views: 8039

Re: GPIO

I also used GPIOs on RPI2, and added corresponding controls in Octoprint, in order to turn on/off both the printer and the lights in my enclosure, directly from octoprint interface. Difference is that in order to turn on/off the printer, my relay is connected to the very same wire as the on/off swit...

Go to advanced search