New 4 Axis Board - TB6560 question

Post Reply
User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

New 4 Axis Board - TB6560 question

Post by niner_zero » Tue Aug 14, 2012 8:07 pm

I got a 4 Axis Board - TB6560 from SeeMeCNC store. Does this version require the opto coupler fix? Can some one please provide some info?

Thanks,
Jacob

User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

Re: New 4 Axis Board - TB6560 question

Post by niner_zero » Tue Aug 14, 2012 9:16 pm

Never mind, I found the post. viewtopic.php?f=22&t=49

johnoly99
Printmaster!
Posts: 736
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN

Re: New 4 Axis Board - TB6560 question

Post by johnoly99 » Wed Aug 15, 2012 3:08 pm

niner, some people don't have any problems with the optos, but some do? If in doubt, jumper them out. haha. I think it has to do with P port voltage, some ports are 3v and some 5v, i'd guess the 5v ones don't have any issues pushing thru the optos

User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

Re: New 4 Axis Board - TB6560 question

Post by niner_zero » Tue Aug 21, 2012 9:59 pm

Removed the optos as described in this forum and rewired with reformed staple pins. Time to spin the motors

Image

Post Reply

Return to “Parallel Port based boards”