Sanguinololu 1.3a Repetier firmware/host settings

User avatar
michaellatif
Printmaster!
Posts: 357
Joined: Mon Mar 26, 2012 1:34 pm
Location: RTP, NC

Sanguinololu 1.3a Repetier firmware/host settings

Postby michaellatif » Tue Mar 27, 2012 12:03 am

Hey all,

Here are screen caps of my slic3r and Repetier host (printer) settings. Below is a link to the Repetier fimware Configuration.h file that I use.
So far the print quality is getting near perfect, still have to work out some tweaks to slic3r and the heated bed temperature.

SeeMeCNC_H-1_Slic3r_settings(1).jpg

SeeMeCNC_H-1_Slic3r_settings(2).jpg

SeeMeCNC_H-1_Printer_settings(1).jpg

SeeMeCNC_H-1_Printer_settings(2).jpg

SeeMeCNC_H-1_Printer_settings(3).jpg


http://www.reprap.org/wiki/SeeMeCNC/Rep ... guration.h
Mike Latif
H-1 #3

User avatar
Dave_Sohlstrom
Printmaster!
Posts: 101
Joined: Mon Mar 26, 2012 5:07 pm
Location: Ariel, WA

Re: Sanguinololu 1.3a Repetier firmware/host settings

Postby Dave_Sohlstrom » Tue Mar 27, 2012 11:04 am

What slic3r version are you using.
Dave Sohlstrom

H-1 Tank

User avatar
michaellatif
Printmaster!
Posts: 357
Joined: Mon Mar 26, 2012 1:34 pm
Location: RTP, NC

Re: Sanguinololu 1.3a Repetier firmware/host settings

Postby michaellatif » Tue Mar 27, 2012 12:11 pm

Hey Dave,

The version that comes with Repetier Host 0.40 is slic3r 0.7.1.
Mike Latif
H-1 #3


Return to “Sanguino (lulu etc...)”

Who is online

Users browsing this forum: No registered users and 2 guests