Trick Laser Max Metal with all the parts to have a full machine

Do you print/build/make/create 'stuff' for modifying SeeMeCNC machines? Post them here if you do so others can see and inquire about getting them!
Post Reply
nohc
Prints-a-lot
Posts: 21
Joined: Mon Nov 21, 2016 11:48 pm

Trick Laser Max Metal with all the parts to have a full machine

Post by nohc » Tue Jul 09, 2019 10:08 pm

So after having this project sit on my bench for quite a while I have decided to see if anyone wants to pick it up. Here is what I have:

Max Metal Frame with FSR brackets and plate.
Trick laser carbon fiber arms
Makerhive harness installed in frame
Aluminum spool holder
Aluminum heat spreader
All motors, belts, etc on assembled frame. Came off RSM v3
Power supply and onyx bed
Duet wifi 1.3
E3d titan aero with printed bracket for berd air
Berd air with eswitch brand new in package

Machine calibrates at .04 110mm radius as is. Hotend is not wired up. I have not printed on the machine as I never hooked the hotend up. Just don't have time to mess with it anymore.

I will do 500 shipped to most places (I am in GA). I don't want to mention what i have in it. Will have UPS pack it up well and budgeting 100 bucks basically for the shipping and packing.
Attachments
20190709_215148.jpg
20190709_215154.jpg

Post Reply

Return to “Members Marketplace”