Extrude is choppy - broken into segments and not complete.

Having a problem? Post it here and someone will be along shortly to help
Post Reply
hcdbey
Printmaster!
Posts: 46
Joined: Mon Jul 27, 2015 4:57 pm

Extrude is choppy - broken into segments and not complete.

Post by hcdbey » Sat Jun 08, 2019 1:16 pm

Rostock Max V2.
MatterControl 1.7.5

Previously, when I would select a manual 10 mm extrude, it would extrude for about 5 seconds and I would get 10 mm. Now, it is very inconsistent.

If I now select 10 mm, it may extrude 1 or 2 mm pause and then extrude a few more millimeters but not enough to make 10 mm.

Similarly, if I select a 100 mm extrude, it will have perhaps 4 or 5 bursts and it will result in less than 100 mm being extruded.

Does anyone have an idea of what is going on and how to fix it?

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4924
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Extrude is choppy - broken into segments and not complete.

Post by geneb » Sun Jun 09, 2019 10:55 am

Try using Repetier Host and see if you get a different behavior.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Post Reply

Return to “Troubleshooting”