Spindle Frequency?

Show off your latest creations, whether 3D printed or not
Post Reply
lukebarber
Noob
Posts: 2
Joined: Wed Mar 08, 2017 11:37 am

Spindle Frequency?

Post by lukebarber » Sun Jan 13, 2019 7:45 pm

I bought and installed a new 1.5kw water-cooled spindle with an inverter to run it. Inverter is https://www.valinonline.com/products/esv152n02yxb . Now whenever I switch the spindle on it triggers my limit switches (in Mach3) and I can only reset it when the spindle is not running. Would adding a line reactor to the inverter help? Spindle and limit switch wiring is all shielded and properly grounded.

I'm virtually at a standstill. Any help?

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4810
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Spindle Frequency?

Post by geneb » Mon Jan 14, 2019 8:30 am

I would reconfigure your limit switches as normally closed. That will prevent electrical interference from generating false triggers.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Post Reply

Return to “What are YOU making?”