Carbon Fiber Rod Upgrade for Artemis

The one, the only, the Atremis. Forum for the monster metal machine from SeeMeCNC
Post Reply
User avatar
artexmg
Printmaster!
Posts: 275
Joined: Tue Sep 10, 2013 2:49 am
Location: Houston, TX

Carbon Fiber Rod Upgrade for Artemis

Post by artexmg » Wed Nov 28, 2018 4:44 am

It took me a while to realize what parameters to configure after upgrading to a Carbon Fiber rods, so, in case somebody else has same trouble this is what I did (and worked!):

Update config.g -

For command M665:

1) set Parameter Diagonal Rod Lenght (Parameter L) to new length = 340.5.
2) set Homed height (Parameter H) to new height = 530
3) delete file "config-override.g"

And that's it!

User avatar
artexmg
Printmaster!
Posts: 275
Joined: Tue Sep 10, 2013 2:49 am
Location: Houston, TX

Re: Carbon Fiber Rod Upgrade for Artemis

Post by artexmg » Wed Nov 28, 2018 4:49 am

Oops! H = 540

Post Reply

Return to “Artemis”