Screaming Demon

The one, the only, the Atremis. Forum for the monster metal machine from SeeMeCNC
KB9AVO
Plasticator
Posts: 6
Joined: Sat Mar 24, 2018 12:14 am

Screaming Demon

Postby KB9AVO » Thu Aug 30, 2018 4:45 pm

No No No ... nothing about bearings ... mine are just great ... The Artemis is just doing great prints, and now added the dual color option..

I know Part Daddy and the crew are running hard, so looking at the online group that may have created a video on the making of a 2 color part and how to get the CURA setup for it. AND how to know which feeder is #1 or #2
I THINK I had it setup .. but still only runs 1 color, so I know I messed up some where..
The guide should be step by step,
Thanks all

Paul

AlanZ
Printmaster!
Posts: 270
Joined: Mon Jan 04, 2016 8:58 pm

Re: Screaming Demon

Postby AlanZ » Fri Aug 31, 2018 7:06 pm

If yours was one of the first batches of Artemis (that have the FSR in the base) make sure you have the most current firmware... the original firmware gave all sorts of odd issues.


Return to “Artemis”

Who is online

Users browsing this forum: No registered users and 1 guest