Coming soon from 713Maker.com

Show off your latest creations, whether 3D printed or not
travelphotog
Printmaster!
Posts: 398
Joined: Tue Jul 15, 2014 12:30 pm
Location: Huntsville, Alabama (Marshall Space Flight Center)
Contact:

Re: Coming soon from 713Maker.com

Postby travelphotog » Mon Aug 21, 2017 1:20 am

TwoTone wrote:Just a suggestion, what ever you do for you do to make mounting your Duet, you may want to offer as an option.

Maybe I'm wrong, but anyone that's going to be spending the money on this kit, I doubt will have a stock V2 at this point.


WZ9V is correct that we currently have the mounting holes for the Duet on the on the V3 kits. I need to look at how much room is inside the V2 kit and where something can be mounted. My honest though was to echo the current setup of the RAMBo and mount the Duet in much the same fashion and have an STL for the needed parts. It has been a very long time since I tore open the base of the V2 and I have just not gotten that far yet in CAD for the Duet mounting with the stock PS system. I agree that most folks will not be stock by the time they do this upgrade, so I am kicking around how to best configure the lower plate to work with as many systems and methods as we can, without having more than one model of base plate to deal with.

One of the biggest concerns is when switching to a full metal build, is that shorts and grounding issues are the main concern and things I have to make sure are accounted for.
http://713maker.com/ Custom aluminum and carbon fiber hot end mounts for the Rostock Max and Orion.

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1494
Joined: Wed Sep 23, 2015 2:55 pm

Re: Coming soon from 713Maker.com

Postby Xenocrates » Mon Aug 21, 2017 10:50 am

There is enough room for a .8.5 at least in the V2, and I believe the wifi and Ethernet are similar in size (I'm told they do share mounting holes). If you need a V2 internal mount, try my design https://repables.com/r/760/. It's an almost exact drop in replacement. It uses two larger fans, and works with a larger aftermarket ATX supply that's about an inch and a half longer, and should work with an industrial supply as well. One suggestion is to use grilles on the back of the fans to protect them and the cabling.
Machines:
Rostock Max V2, 760W corsair modular PSU, PT100 enabled E3D V6 and volcano, self adjusting carriages, Raymond style enclosure
Automation Technology 60W laser cutter/engraver

Sic Transit Gloria Mundi
01-10011-11111100001

travelphotog
Printmaster!
Posts: 398
Joined: Tue Jul 15, 2014 12:30 pm
Location: Huntsville, Alabama (Marshall Space Flight Center)
Contact:

Re: Coming soon from 713Maker.com

Postby travelphotog » Tue Aug 29, 2017 2:50 pm

Twac1 wrote:do you have any V3 kits available? would like to purchase! can I pre order?

PM sent letting you know we have a kit ready for you.
http://713maker.com/ Custom aluminum and carbon fiber hot end mounts for the Rostock Max and Orion.

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: Coming soon from 713Maker.com

Postby Twac1 » Thu Aug 31, 2017 9:28 am

I never got a PM but i sent you one. Just let me know how much and how to pay

travelphotog
Printmaster!
Posts: 398
Joined: Tue Jul 15, 2014 12:30 pm
Location: Huntsville, Alabama (Marshall Space Flight Center)
Contact:

Re: Coming soon from 713Maker.com

Postby travelphotog » Thu Aug 31, 2017 6:20 pm

Twac1 wrote:I never got a PM but i sent you one. Just let me know how much and how to pay

Shoot me an email to matt(at)713maker.com and I will get you all taken care of.
We got the new correctly sized shipping boxes in and the kit in question is packed and ready to go.

We also habe a second kit if anyone is interested in a V3 frame kit.

I am facing the metal tonight for the first V2 prototype kit I hope to mill over the weekend.
http://713maker.com/ Custom aluminum and carbon fiber hot end mounts for the Rostock Max and Orion.

User avatar
Outsider
Printmaster!
Posts: 63
Joined: Wed Nov 11, 2015 6:09 pm

Re: Coming soon from 713Maker.com

Postby Outsider » Thu Aug 31, 2017 8:40 pm

good question...... V2 ..... how much?

TwoTone
Printmaster!
Posts: 139
Joined: Tue Jun 14, 2016 6:36 pm

Re: Coming soon from 713Maker.com

Postby TwoTone » Thu Aug 31, 2017 8:57 pm

Outsider wrote:good question...... V2 ..... how much?


he's mentioned it's not done, so the price hasn't been finalized.

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1157
Joined: Thu Dec 04, 2014 6:06 pm

Re: Coming soon from 713Maker.com

Postby KAS » Sun Nov 05, 2017 10:26 am

Any updates?

travelphotog
Printmaster!
Posts: 398
Joined: Tue Jul 15, 2014 12:30 pm
Location: Huntsville, Alabama (Marshall Space Flight Center)
Contact:

Re: Coming soon from 713Maker.com

Postby travelphotog » Sat Nov 18, 2017 1:54 am

Well at long last I have had enough time to sit down and get some test run on the V2 metal kit parts. Things have been super busy around here which is of course both good and bad. Small adjustment have to be made to the CAD files for things like material thickness differences and the zero give in metal vs melamine. As I go along I also am looking at thing like modified top pulley tensioners and the like. Also working to ID and tap all the holes for screws. Currently the top spacer is needing a bit of extra attention, with zero give due to being made from metal, the top spacer assembly needs a creative approach and I am sure a few other things will also. But I have a enough faced metal stock on hand to make 2-3 kits, plus some extra plates of stock for test pieces on a few parts.
2017-11-18 00.06.jpg
Some of the test parts for the V2 metal kit.


In other news, 713Maker is growing! We just bought a new house and sitting just behind the house is a nice new steel frame shop building with over 2000sqft of workshop space. I will also have over 1900+ sqft of office / R&D space in addition to the shop space in the finished basement. We will also have a nice pole barn for storage of the new forklift. We will start the move at the first of the year. In the mean time I will be working on the tweaks for the V2 kits and a few other items for the current line up of SeemeCNC printers.
House 1b.jpg
Our new home and shop for 713Maker. We will soon have an onsite 40x50 workshop.
shop 1.jpg
This is the view inside the shop as it currently sits. This is about half of the work shop. lots of room to grow!
http://713maker.com/ Custom aluminum and carbon fiber hot end mounts for the Rostock Max and Orion.

User avatar
barry99705
Printmaster!
Posts: 703
Joined: Sun Aug 11, 2013 6:10 pm
Location: west ohio

Re: Coming soon from 713Maker.com

Postby barry99705 » Mon Nov 20, 2017 7:55 am

Cool! Really nice shop!
Never do anything you don't want to have to explain to the paramedics.

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1157
Joined: Thu Dec 04, 2014 6:06 pm

Re: Coming soon from 713Maker.com

Postby KAS » Fri Jun 01, 2018 11:16 am

Bah, looks like it's sold out. Can't wait!

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1325
Joined: Sun May 11, 2014 6:18 pm

Re: Coming soon from 713Maker.com

Postby Mac The Knife » Fri Jun 01, 2018 11:32 am

I sent a request in for a bed platform for my Folgertech FT-5 R2, a month ago, and haven't heard anything back.
R-Max V2
Eris
Folger Tech FT-5 R2

travelphotog
Printmaster!
Posts: 398
Joined: Tue Jul 15, 2014 12:30 pm
Location: Huntsville, Alabama (Marshall Space Flight Center)
Contact:

Re: Coming soon from 713Maker.com

Postby travelphotog » Fri Jun 01, 2018 12:08 pm

Hey,
I launched the new web store yesterday for the entire line of products I make. Anyone can buy any of the products I mill at any point, when they are in stock. The site will not allow a sale if an item is out of stock. You can also request to be emailed by the site when an item you desire is back in stock. Moving forward this is how all my products will be sold as it frees me up to focus on milling and design work vs trying to keep track of hundreds of emails each week and invoices and such. With more time being focused on milling and not sitting in front of the computer for emails and such, product is flowing out of the shop much faster now.
http://713maker.com/ Custom aluminum and carbon fiber hot end mounts for the Rostock Max and Orion.

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1325
Joined: Sun May 11, 2014 6:18 pm

Re: Coming soon from 713Maker.com

Postby Mac The Knife » Fri Jun 01, 2018 1:11 pm

Nice looking storefront. Except for the "Currently out of stock" items!!!!!
R-Max V2
Eris
Folger Tech FT-5 R2

travelphotog
Printmaster!
Posts: 398
Joined: Tue Jul 15, 2014 12:30 pm
Location: Huntsville, Alabama (Marshall Space Flight Center)
Contact:

Re: Coming soon from 713Maker.com

Postby travelphotog » Fri Jun 01, 2018 3:16 pm

Mac The Knife wrote:Nice looking storefront. Except for the "Currently out of stock" items!!!!!

Sorry man. The parts sell F A S T! A new wave of parts will be listed in a day or so. I expect they will likely sell fast also. All I can do is keep milling and shipping out parts.
M
http://713maker.com/ Custom aluminum and carbon fiber hot end mounts for the Rostock Max and Orion.

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1157
Joined: Thu Dec 04, 2014 6:06 pm

Re: Coming soon from 713Maker.com

Postby KAS » Fri Jun 01, 2018 9:14 pm

Keep up the great work! I'll grab a v2 kit when i see it. :)


Return to “What are YOU making?”

Who is online

Users browsing this forum: No registered users and 1 guest