Display with white squares

The new for 2016 Rostock MAX v3!
Post Reply
Posts: 4
Joined: Fri Feb 17, 2017 2:10 am

Display with white squares

Post by hooperbill » Fri Feb 17, 2017 1:09 pm

I have been using my Rostock Max v3 for almost three months will no major issues. Last night I noticed that the display now showed two line of white squares. Up to this point the display was working fine. The printer still functions fine and I am able to do prints. I checked the wiring as best I could without taking the printer apart. As a possible fix I cleared the eprom and uploaded the latest firmware. None of this has corrected the problem. Before I go take the printer apart I was hoping that someone might have a solution.


Went through all the connections and reseated everything. The display is now working.

Posts: 40
Joined: Fri Aug 12, 2016 3:20 pm

Re: Display with white squares

Post by brianmichalk » Wed May 30, 2018 5:34 pm

I'm having a similar problem, but resetting all of the connectors, powering off, and disconnecting USB didn't help. I can still print, but the display is not working.

User avatar
Posts: 4915
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA

Re: Display with white squares

Post by geneb » Thu May 31, 2018 9:22 am

It's possible that the display has simply failed.

Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Post Reply

Return to “Rostock MAX v3”