Tri Hotend

[Eaglezsoar]

Generic Default, do you have a webpage up and running yet?

[Generic Default]

I do have the website up, and while I'm not ready to ship this minute, if you order this week I should definitely be able to ship before the weekend. I'm just hesitant since this is my first time selling anything of relatively high value on the internet, and since it's a professionally developed product I want to make sure it's flawless before taking people's money!

Also be aware that the mass produced version coming in the next few weeks will have some slight improvements, as will any versions after it. I can't tell you what those improvements are right now but just know that I will be sending out upgrade parts to my first few customers once I have them (for free).

Seems kind of unethical to sell you something and then come out with a new and improved version soon after.

I didn't want to post the link to my website here on the forums but apparently Google can take up to several months to index websites, so I guess I'll have to link to it so you can find it...If this violates any forum rules please tell me so I can remove the link. The website isn't entirely finished right now.

http://www.polystroooder.com

[Eaglezsoar]

I do have the website up, and while I'm not ready to ship this minute, if you order this week I should definitely be able to ship before the weekend. I'm just hesitant since this is my first time selling anything of relatively high value on the internet, and since it's a professionally developed product I want to make sure it's flawless before taking people's money!

Also be aware that the mass produced version coming in the next few weeks will have some slight improvements, as will any versions after it. I can't tell you what those improvements are right now but just know that I will be sending out upgrade parts to my first few customers once I have them (for free).

Seems kind of unethical to sell you something and then come out with a new and improved version soon after.

I didn't want to post the link to my website here on the forums but apparently Google can take up to several months to index websites, so I guess I'll have to link to it so you can find it...If this violates any forum rules please tell me so I can remove the link. The website isn't entirely finished right now.

http://www.polystroooder.com

Thanks for the link, I hate to appear stupid but how do I download the two files that you have up?
From what you indicated, it may be better to wait until the improvements are in place.

[Generic Default]

Just to make it clear the production version will only be slightly different in aesthetics, and it may take significantly longer than I thought to get this thing produced in larger quantities. Like a month or two.

The ones I have right now are CNC'd on my own 4 axis mill and lathe, which is slow since I don't have an automatic bar feeder. Setting up a manufacturing and online retailing business is harder than I thought! I'm working on the printed instructions and papers that come in the box right now. The design of the actual hotend is done and tested.

[Jimustanguitar]

The ones I have right now are CNC'd on my own 4 axis mill and lathe, which is slow since I don't have an automatic bar feeder.

See if SeeMeCNC can turn them out on their Mazak for you.

[Mac The Knife]

http://www.emachineshop.com/

[McSlappy]

xxxstruder is a really good name... Might end up with some odd google searches, but hey YOLO!

[Demolishun]

For me this may justify a second machine to put this on.

I am saving up my milk money! Or is it beer money?...

[Tinyhead]

This really caught me by surprise as I haven't seen it done like this yet.... would you be willing to make a dual hot end in the same type of platform? While 3 is crazy impressive, I think some of us that might be trying to achieve dual status would be very interested in something like this. There would be little need to for the dual mounts, the need for the same two identical hot ends, etc... dual hot ends is hard enough to configure correctly let alone three and those crazies with the kraken.

[Jimustanguitar]

This really caught me by surprise as I haven't seen it done like this yet.... would you be willing to make a dual hot end in the same type of platform? While 3 is crazy impressive, I think some of us that might be trying to achieve dual status would be very interested in something like this. There would be little need to for the dual mounts, the need for the same two identical hot ends, etc... dual hot ends is hard enough to configure correctly let alone three and those crazies with the kraken.

Do you lose anything by only using 2 of the 3 nozzles though? Just don't screw in the one that you're not using, and you'll know that you can always keep a spare around or upgrade later.

[Eaglezsoar]

This really caught me by surprise as I haven't seen it done like this yet.... would you be willing to make a dual hot end in the same type of platform? While 3 is crazy impressive, I think some of us that might be trying to achieve dual status would be very interested in something like this. There would be little need to for the dual mounts, the need for the same two identical hot ends, etc... dual hot ends is hard enough to configure correctly let alone three and those crazies with the kraken.

Do you lose anything by only using 2 of the 3 nozzles though? Just don't screw in the one that you're not using, and you'll know that you can always keep a spare around or upgrade later.

I agree with the statement made by Jim.

[Generic Default]

See if SeeMeCNC can turn them out on their Mazak for you.

I don't know about that, they're busy making their own parts on their machines, plus that type of lathe is for bigger stuff. Running hundreds of tiny brass nozzles or the thermal isolators or the aluminum hex heater blocks or the main grooved heat sink would take a ton of time. Also it seems kind of weird since they're going to be selling their own full metal hotend soon, at least I think that's what they're doing in the facebook pictures.

Not only do they have a bunch of laser cutters and a full size CNC lathe, they also have the biggest 3d printer in the world now... LUCKY


I'll check out that emachineshop thing, if they can do swiss type for large parts it might work out.

For me this may justify a second machine to put this on.

I am saving up my milk money! Or is it beer money?...

You have a milk budget? AIN'T NOBODY GOT TIME FO DAT!

would you be willing to make a dual hot end in the same type of platform?

Yes. I might just offer the same Tri hotend but with only two heater blocks instead of three, and with a price reduction. It's still a lot more compact than two regular hotends.



Can somebody try printing the attached Rostock max effector plate for this? I don't have the V2 Max with the new end effector, but it looks like three of the mounting holes will line up with the new one. PLA will not work as a mounting platform for this hotend since it gets soft at such a low temperature. The heat sink gets pretty hot if it's used without a cooling fan at 280 degrees for three nozzles printing trimmer line.


And Eagle, I apologize about the lack of downloads on polystroooder.com. I'm trying to get it set up to work with their eProduct system, but they aren't used to having free downloads for everyone:)

I'll just put the printable parts on an STL hosting website and link to them.

[Eaglezsoar]

Thanks for posting the links to the STL files, I downloaded them fine, thanks.

[Generic Default]

I was just messing around with the PID temperature control for this thing with a smoothieboard. It heats up really fast and cools down really slow. Once it's at the right temperature it holds +-0.2 degrees at 260 C.

I had to change my PID a lot from other hotends since this one has a lot less thermal mass. The first time I did it without changing settings I overshot the temperature by 70 degrees!

[Generic Default]

OK, I think I'm finally ready to start selling these. I had problems with the payment processor but they should be fixed now. Dwolla only for now.


Just to make sure before I actually sell, does the Rostock Max V2 have 2 foot long bowden tubes? My top mount extruder is fine with 2 foot tubes but I want to make sure the length is right before I ship anything.

[Eaglezsoar]

OK, I think I'm finally ready to start selling these. I had problems with the payment processor but they should be fixed now. Dwolla only for now.


Just to make sure before I actually sell, does the Rostock Max V2 have 2 foot long bowden tubes? My top mount extruder is fine with 2 foot tubes but I want to make sure the length is right before I ship anything.

What is Dwolla?

[Generic Default]

Dwolla is a payment processor for online retail. Similar to Paypal (there are dozens of others) but Dwolla is much faster with the transaction and doesn't steal 15% of the sale. The downside is that it takes a couple minutes longer for the checkout process.

I plan on getting more payment processors for the website in the near future.

[Eaglezsoar]

Dwolla is a payment processor for online retail. Similar to Paypal (there are dozens of others) but Dwolla is much faster with the transaction and doesn't steal 15% of the sale. The downside is that it takes a couple minutes longer for the checkout process.

I plan on getting more payment processors for the website in the near future.

So just to be sure, what is included with the XXXtruder. The heating cartridges, are there fans for the cooling along with the shrouds?
Any instructions?
Also the 2 Feet of PTFE should be fine, that is close to what is sent with the V2 kit.

One other thing, the thermistors probably use a manual thermistor table, could you post the appropriate table to use with the tri-extruder, I am horrible trying
to figure out these tables. (for Repetier obviously)

[Generic Default]

What comes in the box:
- 1 Tri heatsink
- 3 Tri hexagon heater blocks
- 3 Tri thermal isolators
- 1 0.50mm M6 brass nozzle
- 2 0.35mm M6 brass nozzles
- 3 2 foot long 2mmID 4mmOD PTFE bowden tubes
- 3 12v 40 watt 6mm heater cartridges
- 3 104GT-2 Semitec thermistors
- 6 uncut glass fiber sleeves (for thermistor connections)
- 7 crimp tubes (for thermistor connections)
- 6 short zip ties (for wire management)
- 6 uncut electrical wires (for thermistor connections)
- 1 30mm or 40mm 12 volt fan
- 6 M4 set screws
- 3 M3 short hex head screws (for the thermistors)
- 2 M3 long hex head screws (for the fan)
- 1 small hex wrench for the set screws
- Printed instructions and important information
What you need:
- A working 3d printer
- Basic assembly skills
- Pliers
- Scissors
- Electrical Multimeter (recommended) - Time


I just copy pasted that straight from polystroooder.com The kit will include everything you need (the Rostock Max/Orion adapter plate too) along with printed instructions for DIY assembly and some other paper stuff. I was just working on the assembly instructions now, I'll show you what I have so far;

[Eaglezsoar]

That information was exactly what I was looking for, I must have missed it on the site.
I did figure out that for Repetier, the thermistors would be set for type 8, the same as the E3D.
Thanks for the info.

[Generic Default]

I have another last-minute dilemma. Right now I have a bunch of 30mm and 40mm fans to use with this hotend. Both of them work, and both are significantly quieter (and less 'vibratey') than the smaller 25mm fans used on other hotends. Both fit onto printed mounts on the heat sink of the hotend.


I can supply both types of fans and mounts for the first batch of hotends I sell, but I only have one printer and printing those three parts at a good quality level takes over 3 hours, which may limit me in daily sales. Do you guys have any suggestions for which one I should go with?

I'm leaning towards 40mm since it has better air flow.

[Eaglezsoar]

Definitely the 40mm.

[Generic Default]

Here's what the 40mm fan looks like on it;

It looks kind of bulky on the Rostock V1 effector plate, but it fits. The blue circular adapter part fits right into the rostock effector plate, then the fan shroud fits over it all. Nothing is loose and nothing rattles. The nice thing about printing this with trimmer line is that you can actually bend the entire fan shroud almost inside-out without breaking it. Plus it won't melt or distort from heat! I was messing with retraction settings when I printed the fan shroud so it has some blobs on it.

[barry99705]

Here's what the 40mm fan looks like on it;

fan mount 1.jpg

It looks kind of bulky on the Rostock V1 effector plate, but it fits. The blue circular adapter part fits right into the rostock effector plate, then the fan shroud fits over it all. Nothing is loose and nothing rattles. The nice thing about printing this with trimmer line is that you can actually bend the entire fan shroud almost inside-out without breaking it. Plus it won't melt or distort from heat! I was messing with retraction settings when I printed the fan shroud so it has some blobs on it.

I wonder if you could make it so it has a 40mm fan mount on one side, and a 30mm mount on the other?

[McSlappy]

I vote 40 too. I honestly value quiet fans over size - I have a Rostock sitting on either side of me right now and I would love to quiet them down

This kit looks awesome!