#define HOTEND

Discussions related to the Rostock MAX v2
Post Reply
benjaminhill
Prints-a-lot
Posts: 22
Joined: Thu Jun 30, 2016 9:19 pm

#define HOTEND

Post by benjaminhill » Mon Jan 15, 2018 7:16 pm

I'm trying to upload the latest firmware (https://github.com/seemecnc/Firmware) to my Rostock Max 2. I've got the E3D All-metal v6 HotEnd upgrade. Which of the three firmware settings should I be using? The latest User Guide (http://download.seemecnc.com/rostockmax/Rostock-MAX-v2-User-Guide-1stEdition.pdf) doesn't mention this setting.

Code: Select all

// SeeMeCNC Bowden w/PEEK barrel = 1
// HE240 on ERIS w/accel probe   = 2
// HE280 w/accel probe           = 3
#define HOTEND 1


The default is #3. I assumed #1 because while an accelerometer probe sounds cool, I'm pretty sure I don't have that. #1.

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1356
Joined: Sun May 11, 2014 6:18 pm

Re: #define HOTEND

Post by Mac The Knife » Mon Jan 15, 2018 7:28 pm

Go with # 1,,,, and you will have to edit your configuration h file for the thermistor value of the E3d, and also the temperature limits.
R-Max V2
Eris
Folger Tech FT-5 R2

benjaminhill
Prints-a-lot
Posts: 22
Joined: Thu Jun 30, 2016 9:19 pm

Re: #define HOTEND

Post by benjaminhill » Sat Jan 27, 2018 8:04 pm

Will do, thank you!

Post Reply

Return to “Rostock MAX v2”