Nozzle thermistor failed

The ERIS Delta, a truly affordable entry into Delta 3D Printing
ivanhandler
Printmaster!
Posts: 77
Joined: Wed Jan 18, 2017 4:39 pm

Nozzle thermistor failed

Postby ivanhandler » Wed Jun 21, 2017 8:23 pm

I can no longer get a temperature reading from the Eris. I cleared a jam out of my extruder and then the thermistor stopped working at the beginning of a print. No idea of what happened. Any ideas on how to fix this without buying a new hotend??

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1340
Joined: Sun May 11, 2014 6:18 pm

Re: Nozzle thermistor failed

Postby Mac The Knife » Wed Jun 21, 2017 9:30 pm

Just buy a new thermistor from their website. Keep track of your dissasembly, and if you have good soldering skills, you will be fine.
R-Max V2
Eris
Folger Tech FT-5 R2

ivanhandler
Printmaster!
Posts: 77
Joined: Wed Jan 18, 2017 4:39 pm

Re: Nozzle thermistor failed

Postby ivanhandler » Thu Jun 22, 2017 10:47 am

Can you or anyone tell me where and how I need to install it? Thanks

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1340
Joined: Sun May 11, 2014 6:18 pm

Re: Nozzle thermistor failed

Postby Mac The Knife » Thu Jun 22, 2017 12:19 pm

This link is for building the big HE280, but the Eris hotend is very similar. https://seemecnc.dozuki.com/Guide/HE280+Assembly/45
Step 26 is the start of the thermistor installation.
R-Max V2
Eris
Folger Tech FT-5 R2


Return to “ERIS Delta”

Who is online

Users browsing this forum: No registered users and 2 guests