October 2014 Contest ! ! !

We'll be posting our SeeMeCNC contests here, anyone can enter!
johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

October 2014 Contest ! ! !

Postby johnoly99 » Wed Sep 24, 2014 12:14 pm

halloween940x420.png



So here we are guys, just over a month away from Halloween/Autumn/Harvest time, and we're going to have another contest! This time, we're not going to provide the model, you gotta find/design/draw/invent one yourself!

Here's the rules:

Post here in this forum with a link/attribution to the model used (must be freely downloadable and if licensed, be any truly open source license, so no "NC" licenses allowed )
Post pics (pics are how we'll judge, but not the only way)
BONUS points for most useful decoration/prop/costume/gadget!



Now, what's it worth to ya?

1st place: $100 gift card to the store, stock up on all that filament you need for christmas presents!
2nd place: $50 gift card to the store
3rd place: $25 gift card



Deadline for entries is October 31st. We'll pick the winners then so make sure you have yours posted by then!


Enjoy guys, and lets see what you come up with!
SeeMeCNC Co-Founder & V.P.

User avatar
Jimustanguitar
ULTIMATE 3D JEDDI
Posts: 2625
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: October 2014 Contest ! ! !

Postby Jimustanguitar » Wed Sep 24, 2014 12:52 pm

1st prize? My suggestion:

A DropLit with Haloween Orange Acrylic, of course!

johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Re: October 2014 Contest ! ! !

Postby johnoly99 » Wed Sep 24, 2014 1:04 pm

I see what you did there jim :)
SeeMeCNC Co-Founder & V.P.

User avatar
Jimustanguitar
ULTIMATE 3D JEDDI
Posts: 2625
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: October 2014 Contest ! ! !

Postby Jimustanguitar » Wed Sep 24, 2014 2:07 pm

For the record... The prizes were blank when I entered my suggestion :)

User avatar
DavidF
Printmaster!
Posts: 777
Joined: Thu Aug 29, 2013 12:12 pm
Location: Delaware

Re: October 2014 Contest ! ! !

Postby DavidF » Wed Sep 24, 2014 2:17 pm

Jimustanguitar wrote:1st prize? My suggestion:

A DropLit with Haloween Orange Acrylic, of course!


I like the way you think ;)
http://www.youtube.com/user/aonemarine
Lost pla castings? see me

User avatar
emile1138
Printmaster!
Posts: 64
Joined: Tue Feb 18, 2014 10:37 pm

Re: October 2014 Contest ! ! !

Postby emile1138 » Fri Sep 26, 2014 10:06 pm

Dude! Awesome! I'd love to win this and come check out the shop sometime!!!




...Oh, wait...

RAMTechRob
Printmaster!
Posts: 171
Joined: Tue Apr 22, 2014 10:00 pm

Re: October 2014 Contest ! ! !

Postby RAMTechRob » Sun Sep 28, 2014 5:39 pm

Image

Image

From Thingiverse.com http://www.thingiverse.com/thing:167043

This one is 60% of size, I was able to fit 2 of them at a time on the Orion. The 100% size came out really nice with one piece at a time, so there aren;t any strings between the parts.

PLA
10 % fill
2 shells.

johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Re: October 2014 Contest ! ! !

Postby johnoly99 » Sun Sep 28, 2014 6:58 pm

First entry's in, come on boys and girls, show us what you got!
SeeMeCNC Co-Founder & V.P.

johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Re: October 2014 Contest ! ! !

Postby johnoly99 » Thu Oct 02, 2014 10:43 am

Come on guys, you gonna let Ramtechrob take home all the prizes?
SeeMeCNC Co-Founder & V.P.

RAMTechRob
Printmaster!
Posts: 171
Joined: Tue Apr 22, 2014 10:00 pm

Re: October 2014 Contest ! ! !

Postby RAMTechRob » Thu Oct 02, 2014 10:50 am

I have more excellent prints coming, so I will be winning anyway.

User avatar
DavidF
Printmaster!
Posts: 777
Joined: Thu Aug 29, 2013 12:12 pm
Location: Delaware

Re: October 2014 Contest ! ! !

Postby DavidF » Thu Oct 02, 2014 10:51 am

, so NO cc-by-NC licenses allowed )


is ramtechrobs entry a legal entry??
http://www.youtube.com/user/aonemarine
Lost pla castings? see me

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1306
Joined: Sun May 11, 2014 6:18 pm

Re: October 2014 Contest ! ! !

Postby Mac The Knife » Thu Oct 02, 2014 12:11 pm

DavidF wrote:
, so NO cc-by-NC licenses allowed )


is ramtechrobs entry a legal entry??


And what is a "NC" License anyways? Also, when is the deadline for entries?
R-Max V2
Eris

User avatar
DavidF
Printmaster!
Posts: 777
Joined: Thu Aug 29, 2013 12:12 pm
Location: Delaware

Re: October 2014 Contest ! ! !

Postby DavidF » Thu Oct 02, 2014 12:13 pm

creative commons, non comercial....I guess its just the NC part thats not allowed??
http://www.youtube.com/user/aonemarine
Lost pla castings? see me

johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Re: October 2014 Contest ! ! !

Postby johnoly99 » Thu Oct 02, 2014 1:32 pm

Ahh, good point! Link to the file shows an NC (non-commercial) then it's no good! Best bet is to design/remix your own and upload it to repables.com with the proper license
SeeMeCNC Co-Founder & V.P.

User avatar
jmpreuss
Printmaster!
Posts: 182
Joined: Fri Sep 20, 2013 1:12 pm

Re: October 2014 Contest ! ! !

Postby jmpreuss » Thu Oct 02, 2014 1:37 pm

Deadline would be nice to know. I have some ideas but I need to know the time frame.
PTMNBN="Printer that must not be named" - a heavily upgraded Replicator 2

johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Re: October 2014 Contest ! ! !

Postby johnoly99 » Thu Oct 02, 2014 3:34 pm

Just posted, the deadline is Oct. 31st sometime in the AM (that's when we'll pick the winners)


And looks like a little research and the pumpkin robotech posted is not an NC license, so you're in!
SeeMeCNC Co-Founder & V.P.

RAMTechRob
Printmaster!
Posts: 171
Joined: Tue Apr 22, 2014 10:00 pm

Re: October 2014 Contest ! ! !

Postby RAMTechRob » Thu Oct 02, 2014 3:57 pm

Alright, I'm out. No time to design my own. Go ahead and delete my entry.

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: October 2014 Contest ! ! !

Postby Jassper » Thu Oct 02, 2014 10:36 pm

Ok, my own creation. Just finished it today. Uploaded to http://repables.com/r/400 so I hope I picked the right license Let me know if it's wrong and I'll change it. Didn't even know there was a contest until Jimustanguitar mentioned it so I figured I'd enter.

Checkers anyone?
Pics Black = ABS Orange = PLA
Image

Image

Image

Image

Image
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: October 2014 Contest ! ! !

Postby Holy1 » Fri Oct 03, 2014 11:03 am

I'm confused about the license. I wanted to use a model from GrabCad . how will I know about the license?

Thanks
Orion to Cartesian viewtopic.php?f=59&t=7808

User avatar
Brian.
Plasticator
Posts: 8
Joined: Thu May 15, 2014 10:15 pm

Re: October 2014 Contest ! ! !

Postby Brian. » Fri Oct 03, 2014 1:08 pm

Made this giant Jack-O'-Lantern on my Orion. Printed out beautifully.

Image

And a time-lapse of this 11 hour print.


Design File: http://www.thingiverse.com/thing:31395

maxumx
Noob
Posts: 1
Joined: Sat Feb 15, 2014 1:38 am

Re: October 2014 Contest ! ! !

Postby maxumx » Mon Oct 06, 2014 2:17 am

well i cannot print it my self until the end of the month, but here would be my quick entrant into the pumpkin side of things. Because, i just have to make a pumpkin..:P

Image

Can be found on repables here http://repables.com/r/410/

I am working on something a little more interesting but this is a good start.

jesse
Printmaster!
Posts: 418
Joined: Tue Jan 01, 2013 8:38 pm
Contact:

Re: October 2014 Contest ! ! !

Postby jesse » Mon Oct 06, 2014 9:05 am

Anyone interested in making their own model. I recommend Meshmixer or FlatFab.




lroger01
Plasticator
Posts: 13
Joined: Fri Aug 29, 2014 11:08 pm

Re: October 2014 Contest ! ! !

Postby lroger01 » Sat Oct 11, 2014 10:23 am

spider slick.jpg
Main entry photos


Spider WIPS.jpg
The actual print


My entry is a black widow spider. This spider was printed on my ORION in ABS. The body/head was printed with supports. The legs were printed on a 2 layer raft with supports and the raft was left on to simulate hairy legs.

The final spider is quite large. It made me jump more than once when I forgot it was there!

This spider is an original design. I did reference photos from Thinkstock (I have a license) when designing it. The files have been placed on Thingiverse http://www.thingiverse.com/thing:496999.

So I win, right?

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: October 2014 Contest ! ! !

Postby Eaglezsoar » Sat Oct 11, 2014 12:21 pm

A very nice black widow!

User avatar
Batteau62
Printmaster!
Posts: 398
Joined: Wed Apr 03, 2013 12:36 pm
Location: Connecticut

Re: October 2014 Contest ! ! !

Postby Batteau62 » Sat Oct 11, 2014 1:43 pm

Look what oozed out of my E3d!! :evil: HAPPY HALLOWEEN!! :twisted:
E3dSkulllowres.jpg
E3dSkull2lowres.jpg
E3dSkull3lowres.jpg


Sliced Human Skull with Mandible and Teeth
by MacGyver, published Jan 20, 2013[attachment=2]E3dSkulllowres.jpg


http://www.thingiverse.com/thing:43591

filament is: http://www.amazon.com/gp/product/B00HBF ... UTF8&psc=1
80C-bed
230C-extruder
prints in four pieces
-"Simpler is better, except when complicated looks really cool."
-"As soon as you make something fool proof...along comes an idiot."
-"I have not failed. I've just found 10,000 ways that won't work." ~Thomas Edison


Return to “3D Printing Contests”

Who is online

Users browsing this forum: No registered users and 1 guest