Possible native FullHD (1920x1080) candidate for < 700USD

What projectors work, how to modify them and how to make them work
dasaki
Noob
Posts: 2
Joined: Mon Sep 15, 2014 5:58 am

Possible native FullHD (1920x1080) candidate for < 700USD

Postby dasaki » Mon Sep 15, 2014 11:01 am

Searching in for the cheapest 1920x1080 DLP projector I came across this:

http://www.projectorcentral.com/Optoma-HD141X.htm

It says it was released past month...

In Spain you can get online it for less than 600eur: http://allshop.es/es/videoproyectores-3 ... 49608.html

Any brave one to try it? :D

User avatar
guanu
SeeMeCNC Staff
Posts: 397
Joined: Mon Mar 26, 2012 1:54 pm

Re: Possible native FullHD (1920x1080) candidate for < 700US

Postby guanu » Mon Sep 15, 2014 11:56 am

if you are looking for a 1080p projector cheap, I would suggest looking into the Acer P1500.... its a 1920x1080 native projector, and requires NO modification to use on a resin printer, so you can use it as a normal projector without having to "un mod" anything.. no opening at all, just focus and go!

Guanu

User avatar
DavidF
Printmaster!
Posts: 777
Joined: Thu Aug 29, 2013 12:12 pm
Location: Delaware

Re: Possible native FullHD (1920x1080) candidate for < 700US

Postby DavidF » Mon Sep 15, 2014 3:53 pm

guanu wrote:if you are looking for a 1080p projector cheap, I would suggest looking into the Acer P1500.... its a 1920x1080 native projector, and requires NO modification to use on a resin printer, so you can use it as a normal projector without having to "un mod" anything.. no opening at all, just focus and go!

Guanu


No kidding?? Sounds too good to be true, but I trust you.
http://www.youtube.com/user/aonemarine
Lost pla castings? see me

dasaki
Noob
Posts: 2
Joined: Mon Sep 15, 2014 5:58 am

Re: Possible native FullHD (1920x1080) candidate for < 700US

Postby dasaki » Mon Sep 15, 2014 5:04 pm

guanu wrote:if you are looking for a 1080p projector cheap, I would suggest looking into the Acer P1500.... its a 1920x1080 native projector, and requires NO modification to use on a resin printer, so you can use it as a normal projector without having to "un mod" anything.. no opening at all, just focus and go!

Guanu


Good to know, and it is an affordable one too! :)


Return to “Projectors and How To Mod them”

Who is online

Users browsing this forum: No registered users and 2 guests