Makerjuice SubSF

Resins, sources, hybrid mixes, made-at-home and more
johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Makerjuice SubSF

Postby johnoly99 » Tue Jul 08, 2014 2:31 pm

Got a couple quarts of Makerjuice SubSF resin in Blue last week. I love the color, we'll see how it prints here when we get the machine put together :D
SeeMeCNC Co-Founder & V.P.

User avatar
McSlappy
Printmaster!
Posts: 809
Joined: Wed Dec 11, 2013 9:11 pm
Location: Queensland, Australia
Contact:

Re: Makerjuice SubSF

Postby McSlappy » Tue Jul 08, 2014 10:08 pm

John you seem more active here lately, which is a great thing, it's always nice to see some red names. Have you gotten some more help at work?
I loved my Rostock so much I now sell them in Oz :)

User avatar
Glacian22
Printmaster!
Posts: 330
Joined: Thu Apr 04, 2013 6:07 am
Location: Seattle

Re: Makerjuice SubSF

Postby Glacian22 » Wed Jul 09, 2014 4:21 am

johnoly99 wrote:Got a couple quarts of Makerjuice SubSF resin in Blue last week. I love the color, we'll see how it prints here when we get the machine put together :D


I've found SubSF to be a little more finicky than SubG+, since it's much more viscous and way more heavily pigmented. Looking forward to your experiments! :mrgreen:

sgraber
Printmaster!
Posts: 40
Joined: Sat Mar 22, 2014 5:40 pm
Contact:

Re: Makerjuice SubSF

Postby sgraber » Tue Jul 29, 2014 4:28 pm

What do you mean by "finicky"? Is it harder to cure or is the viscosity an issue? I've not had a problem with it, so I am curious to know your experience with it.

User avatar
Glacian22
Printmaster!
Posts: 330
Joined: Thu Apr 04, 2013 6:07 am
Location: Seattle

Re: Makerjuice SubSF

Postby Glacian22 » Tue Jul 29, 2014 7:21 pm

I had a little trouble keeping it stuck to the build plate at first, and the viscosity meant I had to slow down my peel operation. Other than that, it's good stuff. :)

sgraber
Printmaster!
Posts: 40
Joined: Sat Mar 22, 2014 5:40 pm
Contact:

Re: Makerjuice SubSF

Postby sgraber » Fri Aug 01, 2014 10:55 am

Ah, well you'll have that with resins. Sometimes we just can't get the viscosity down any lower without losing properties...

johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Re: Makerjuice SubSF

Postby johnoly99 » Thu Aug 07, 2014 9:05 am

McSlappy, yes, with JJ's help, i've had more time to get caught up in the machine shop/production side of things and have some time to finish some 'pet projects' like the droplit :)

So, SubSF at least in the blue tint isn't so hot :( The blue was scattering pretty bad, so i took sgrabers advice and got some other colors. I'll be testing the subSF stuff this next week, but so far have been printing REALLY well with the G+ in red, yellow and green with little problems. They seem to be ok with changes to the settings that the subSF was more picky about, so i think that's a good thing for starters
SeeMeCNC Co-Founder & V.P.

User avatar
Jimustanguitar
ULTIMATE 3D JEDDI
Posts: 2632
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: Makerjuice SubSF

Postby Jimustanguitar » Sun Dec 13, 2015 11:22 pm

I've been printing for a whopping 3 days with a jug of SF resin. I'm not sure if it's the same stuff as *sub*SF, but I don't see anything with Sub in the name on their site anymore, so perhaps it superseded it.

Anyway though, prints are looking good!

Image

Image

Image

Image

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Makerjuice SubSF

Postby Eaglezsoar » Mon Dec 14, 2015 3:35 pm

Jim, that resolution your parts have appears to be outstanding. Great job!


Return to “Resin Materials”

Who is online

Users browsing this forum: No registered users and 1 guest