BeBoPr++

Post Reply
User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

BeBoPr++

Post by bubbasnow » Thu Jun 26, 2014 7:23 pm

I picked 2 of these up a while back finally getting time to document the work ive been doing getting this to work with a delta.

Ive populated it with 4 http://www.panucatt.com/product_p/sd8825.htm
Image

Ill be powering it with http://www.ebay.com/itm/271159932338?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Image

Im controlling it with https://www.adafruit.com/product/1876
Image

ive flashed the eMMC with the 7.4 machinekit image from here http://www.machinekit.net/deb/rootfs/wheezy/
Image

User avatar
teoman
ULTIMATE 3D JEDDI
Posts: 1783
Joined: Sat May 24, 2014 5:43 pm

Re: BeBoPr++

Post by teoman » Fri Nov 21, 2014 6:47 am

Did you manage to get it working with LinuxCNC?

The more i fiddle with the printer, the more upgrades i want to do. And linux seems like a good route.
When on mobile I am brief and may be perceived as an arsl.

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: BeBoPr++

Post by bubbasnow » Fri Nov 21, 2014 6:08 pm


User avatar
626Pilot
ULTIMATE 3D JEDDI
Posts: 1719
Joined: Tue May 14, 2013 12:52 pm

Re: BeBoPr++

Post by 626Pilot » Sun Sep 27, 2015 8:19 am

I'm trying to get some more information put together while I evaluate the BeagleBone solution. Can you post:

- What OS you're using, how you downloaded it, and how you flashed it
- How you installed MachineKit
- What display you're using, where you got it, and what you had to do to set it up
- Where you got your hardware
- Anything else that might have changed since you started the thread

Thanks!

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: BeBoPr++

Post by bubbasnow » Sat Oct 03, 2015 10:37 pm

626Pilot wrote:I'm trying to get some more information put together while I evaluate the BeagleBone solution. Can you post:

- What OS you're using, how you downloaded it, and how you flashed it
- How you installed MachineKit
- What display you're using, where you got it, and what you had to do to set it up
- Where you got your hardware
- Anything else that might have changed since you started the thread

Thanks!


Sorry was away for the week,

-OS is debian, standard for revC versions of BBB
-Machinekit was pre-installed ver 2.7 pre
-I have a monitor directly hooked up, i an running TKEMC interface because large gcode files crash axis interface, hdmi port is supported out of the box.
-I purchased bebopr++ and pepper and step-5 directly from the creator Bas.
-stuff ive changed... ive had to update addresses of file locations because of the newer methods of configurations that machinekit uses.

Post Reply

Return to “Beaglebone Black”