BeBoPr++

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

BeBoPr++

Postby bubbasnow » Thu Jun 26, 2014 7:23 pm

I picked 2 of these up a while back finally getting time to document the work ive been doing getting this to work with a delta.

Ive populated it with 4 http://www.panucatt.com/product_p/sd8825.htm
Image

Ill be powering it with http://www.ebay.com/itm/271159932338?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Image

Im controlling it with https://www.adafruit.com/product/1876
Image

ive flashed the eMMC with the 7.4 machinekit image from here http://www.machinekit.net/deb/rootfs/wheezy/
Image

User avatar
teoman
ULTIMATE 3D JEDDI
Posts: 1783
Joined: Sat May 24, 2014 5:43 pm

Re: BeBoPr++

Postby teoman » Fri Nov 21, 2014 6:47 am

Did you manage to get it working with LinuxCNC?

The more i fiddle with the printer, the more upgrades i want to do. And linux seems like a good route.
When on mobile I am brief and may be perceived as an arsl.

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: BeBoPr++

Postby bubbasnow » Fri Nov 21, 2014 6:08 pm


User avatar
626Pilot
ULTIMATE 3D JEDDI
Posts: 1719
Joined: Tue May 14, 2013 12:52 pm

Re: BeBoPr++

Postby 626Pilot » Sun Sep 27, 2015 8:19 am

I'm trying to get some more information put together while I evaluate the BeagleBone solution. Can you post:

- What OS you're using, how you downloaded it, and how you flashed it
- How you installed MachineKit
- What display you're using, where you got it, and what you had to do to set it up
- Where you got your hardware
- Anything else that might have changed since you started the thread

Thanks!

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: BeBoPr++

Postby bubbasnow » Sat Oct 03, 2015 10:37 pm

626Pilot wrote:I'm trying to get some more information put together while I evaluate the BeagleBone solution. Can you post:

- What OS you're using, how you downloaded it, and how you flashed it
- How you installed MachineKit
- What display you're using, where you got it, and what you had to do to set it up
- Where you got your hardware
- Anything else that might have changed since you started the thread

Thanks!


Sorry was away for the week,

-OS is debian, standard for revC versions of BBB
-Machinekit was pre-installed ver 2.7 pre
-I have a monitor directly hooked up, i an running TKEMC interface because large gcode files crash axis interface, hdmi port is supported out of the box.
-I purchased bebopr++ and pepper and step-5 directly from the creator Bas.
-stuff ive changed... ive had to update addresses of file locations because of the newer methods of configurations that machinekit uses.


Return to “Beaglebone Black”

Who is online

Users browsing this forum: No registered users and 1 guest