24V on the Azteeg X3 Pro?

User avatar
PeteD
Prints-a-lot
Posts: 26
Joined: Wed Feb 18, 2015 4:37 pm

24V on the Azteeg X3 Pro?

Postby PeteD » Fri Jul 24, 2015 12:10 pm

I'm about to upgrade my Rostock MAX v2 to handle 3 extruders/hotends. Part of the upgrade is to replace the RAMBo with an Azteeg X3 Pro. I'm thinking up upgrading the PSU to a 24V PSU as well. The Azteeg is advertised as allowing a 12V-24V input. Has anyone actually run 24V through an Azteeg X3 Pro? Are there any issues with doing this that I should watch out for?

User avatar
Renha
Printmaster!
Posts: 282
Joined: Fri Apr 11, 2014 2:18 am
Location: Balashikha, Russian Federation
Contact:

Re: 24V on the Azteeg X3 Pro?

Postby Renha » Fri Jul 24, 2015 6:20 pm

I am using AX3P with 24V, and I haven't any issues.
3D printing is magic!

Sorry my engrish :-/ you could PM me in Russian.

User avatar
PeteD
Prints-a-lot
Posts: 26
Joined: Wed Feb 18, 2015 4:37 pm

Re: 24V on the Azteeg X3 Pro?

Postby PeteD » Mon Jul 27, 2015 10:21 am

Are you using an SSR for the heated bed?

User avatar
Renha
Printmaster!
Posts: 282
Joined: Fri Apr 11, 2014 2:18 am
Location: Balashikha, Russian Federation
Contact:

Re: 24V on the Azteeg X3 Pro?

Postby Renha » Tue Jul 28, 2015 3:32 am

Nope, pure 24V, input and output.
3D printing is magic!

Sorry my engrish :-/ you could PM me in Russian.

User avatar
PeteD
Prints-a-lot
Posts: 26
Joined: Wed Feb 18, 2015 4:37 pm

Re: 24V on the Azteeg X3 Pro?

Postby PeteD » Tue Jul 28, 2015 10:18 am

What is the wattage of your 24V power supply?

User avatar
Renha
Printmaster!
Posts: 282
Joined: Fri Apr 11, 2014 2:18 am
Location: Balashikha, Russian Federation
Contact:

Re: 24V on the Azteeg X3 Pro?

Postby Renha » Tue Jul 28, 2015 10:23 am

750W meanwell
3D printing is magic!

Sorry my engrish :-/ you could PM me in Russian.

User avatar
0110-m-p
Printmaster!
Posts: 456
Joined: Sun Oct 20, 2013 9:23 am
Location: Atlanta, GA

Re: 24V on the Azteeg X3 Pro?

Postby 0110-m-p » Tue Jul 28, 2015 11:16 am

Which heated bed revision? Do you know the resistance of it?
Current Machines || Rostock Max (V1) | V3DR ||
Previous Machines || Flashforge Creator Pro ||

User avatar
PeteD
Prints-a-lot
Posts: 26
Joined: Wed Feb 18, 2015 4:37 pm

Re: 24V on the Azteeg X3 Pro?

Postby PeteD » Tue Jul 28, 2015 11:23 am

That is awesome! you don't have any additional cooling on the board?

User avatar
Renha
Printmaster!
Posts: 282
Joined: Fri Apr 11, 2014 2:18 am
Location: Balashikha, Russian Federation
Contact:

Re: 24V on the Azteeg X3 Pro?

Postby Renha » Thu Jul 30, 2015 3:11 am

PeteD wrote:That is awesome! you don't have any additional cooling on the board?

I had two 12v pumps in series for water cooling, but lately I have bought 24v fan for air-cooling
3D printing is magic!

Sorry my engrish :-/ you could PM me in Russian.

User avatar
Nylocke
ULTIMATE 3D JEDDI
Posts: 1421
Joined: Sun Jun 23, 2013 1:43 pm
Location: Iowa

Re: 24V on the Azteeg X3 Pro?

Postby Nylocke » Thu Jul 30, 2015 10:41 pm

I am also running 24V through my X3 Pro. Its a 360 Watt one I got from Lulzbot. Running the bed and steppers on 24V. Still doing the hotend/other bits on 12V, since they aren't rated/designed for 24V.


Return to “Azteeg X3 and X3 Pro”

Who is online

Users browsing this forum: No registered users and 2 guests