Blew a fet

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Blew a fet

Postby bubbasnow » Fri Apr 08, 2016 10:46 pm

well my 2.6 fan shorted out on my hotend today. blew this guy up!

https://goo.gl/photos/C49YDPd1cCjU1hww6

Also fried my t1 adc it looks like. it just sits constant at 22.3 deg and does not change values to "inf" when i remove the connection from my board.

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Blew a fet

Postby Eaglezsoar » Fri Apr 08, 2016 11:00 pm

Can you send the card in for repair?
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: Blew a fet

Postby bubbasnow » Fri Apr 08, 2016 11:16 pm

ZXMN4A06GTA is the fet part number, they only cost 2 bucks so its probably not worth it to send it back. The weird thing is that damn T1 temp sensor holding a value when OL. which means i might have damaged the adc or some of the components that its wired to.

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Blew a fet

Postby Eaglezsoar » Sat Apr 09, 2016 12:01 am

bubbasnow wrote:ZXMN4A06GTA is the fet part number, they only cost 2 bucks so its probably not worth it to send it back. The weird thing is that damn T1 temp sensor holding a value when OL. which means i might have damaged the adc or some of the components that its wired to.


The ADC is probably not so easy to remove from the board and replace so you may end up sending it back to the manufacturer after all. Here's to hoping
that you can repair it your self.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: Blew a fet

Postby bubbasnow » Sat Apr 09, 2016 12:08 am

Eaglezsoar wrote:
The ADC is probably not so easy to remove from the board and replace so you may end up sending it back to the manufacturer after all. Here's to hoping
that you can repair it your self.


you are quite right, this is probably directly to the cpu. not going to attempt that mess.


Return to “Smoothieboard and variants”

Who is online

Users browsing this forum: No registered users and 3 guests