Ninja Flex

Discuss filament successes and failures!
Post Reply
hmanvel
Prints-a-lot
Posts: 27
Joined: Mon Dec 08, 2014 8:35 am

Ninja Flex

Post by hmanvel » Thu May 02, 2019 8:42 am

I have had a spool of ninja flex for a couple of years, unused. I'm certain I bought it from SeeMeCNC. Just ran a big part with it, that used most of the spool. It processed great, never a problem and part turned out beautiful. Wanted to build a duplicate so I went on the website to buy another spool, and I can't find it on SeeMeCNC. Ended up going to Ninja Tek? and buying a spool. It was expensive like $50+, and when it arrived I saw that it was way different from the first material. It is not smooth, more like serrated. And about 10 minutes into the build the nozzle jammed and it quit feeding. I just ordered some .5 nozzles, it was a .4 that plugged up. What happened to the "other" ninja flex?

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4886
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Ninja Flex

Post by geneb » Fri May 03, 2019 8:55 am

You might want to give this a shot:
https://www.amazon.com/SAINSMART-Flexib ... 4-fkmrnull

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

nurbie
Prints-a-lot
Posts: 31
Joined: Tue May 09, 2017 12:53 am
Location: spaceship earth

Re: Ninja Flex

Post by nurbie » Thu May 09, 2019 7:36 pm

I also ordered a reel of NinjaFlex when I got my V3 kits.
The regular-flex was out of stock so I got 'semi-flex'? something like that nomenclature.
It's ancient, and apparently hydroscopic, so it shouldn't work at all,
but,
repeatedly produced/es outstanding prints, feeds well, no mods other than temp settings.
It is smooth and 'natural' colored.

I'm wondering if you happened to get the same stuff the first time... the softer version has all the issues you mentioned

Post Reply

Return to “Filament”