Max V2 modernization

Discussions related to the Rostock MAX v2
Post Reply
Posts: 1
Joined: Mon Apr 15, 2019 12:24 pm

Max V2 modernization

Post by Rybat » Tue Apr 16, 2019 11:01 am

I have a Rosctock Max V2 with updated HE280 Hotend with accelerometer that never worked....This machine electrically is far to noisy for I2C signal. I tried using differential I2C and no simply does not work properly. I have updated the Ball link Armsand Tensioner's but need to update the Extruder and Bowden Tube to newer Design. This machine worked flawlessly prior to the upgrades and has been sitting on the bench now for 3 years.

I'm asking the community for suggestions to make my Max V2 sing again. What Works today and everyday?

Updated Hotend
Updated Power supply
Updated Controller
Updated Firmware
Updated Extruder

Open to recommendations

User avatar
Posts: 4885
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA

Re: Max V2 modernization

Post by geneb » Wed Apr 17, 2019 9:11 am

Considering the number of v2's out there with working HE280 upgrades, I wouldn't be so quick to blame the HE280. ;)

Delta Power!
Defeat the Cartesian Agenda! - 80-0007, The only one of its kind. - Technical and Simulator Projects

Post Reply

Return to “Rostock MAX v2”