Octopi Changing to my second extruder on a single color print

Talk about the web based OctoPrint controllers
cruzinbill
Plasticator
Posts: 18
Joined: Mon Feb 06, 2017 8:04 pm

Octopi Changing to my second extruder on a single color print

Postby cruzinbill » Sun Jun 18, 2017 8:30 pm

Have had this happen twice now and not sure what is causing it. I loaded a print I've done before and it is definitely cut as a single color. After about 2 hours in it just randomly changed to my second extruder and began using it instead.

Anyone know why this is and how to fix it?

User avatar
pouncingiguana
Printmaster!
Posts: 104
Joined: Tue Nov 15, 2016 8:48 am

Re: Octopi Changing to my second extruder on a single color print

Postby pouncingiguana » Mon Jun 19, 2017 7:33 pm

Known bug when using Octoprint to control a Rostock over usb with dual extrusion enabled. We're crazy with out move right now, but the short fix is to print from the SD card and shut down the PI. It'll print right every time.

cruzinbill
Plasticator
Posts: 18
Joined: Mon Feb 06, 2017 8:04 pm

Re: Octopi Changing to my second extruder on a single color print

Postby cruzinbill » Tue Jun 20, 2017 2:55 am

Ah ok thanks, I'll simply disable dual extrusion then enable it when doing that type of print. That makes sense then since it didn't happen until I told octopi there was 2 extruders.


Return to “OctoPrint”

Who is online

Users browsing this forum: No registered users and 1 guest