Diagnoal Rod length

A pre-assembled Delta Printer that can print a 6" cube 8" tall!
Fester
Prints-a-lot
Posts: 33
Joined: Sat Feb 22, 2014 10:06 pm

Diagnoal Rod length

Postby Fester » Tue Mar 03, 2015 1:32 pm

I would like to know the default factory setting on diagonal rod length . I may have changed by mistake when adjusting the Horizontal radius. I have 178mm now :oops:

User avatar
Jimustanguitar
ULTIMATE 3D JEDDI
Posts: 2631
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: Diagnoal Rod length

Postby Jimustanguitar » Tue Mar 03, 2015 1:55 pm

269mm (for RMaxV2, nice catch, Earthbound!) The Orion is shorter.
Last edited by Jimustanguitar on Tue Mar 03, 2015 2:29 pm, edited 1 time in total.

Earthbound
Printmaster!
Posts: 458
Joined: Sun Sep 07, 2014 2:39 am

Re: Diagnoal Rod length

Postby Earthbound » Tue Mar 03, 2015 2:16 pm

178mm is factory setting for the Orion.

269mm is factory setting for the Rostock Max.
"Trust no quote from the Internet." - Abraham Lincoln

Fester
Prints-a-lot
Posts: 33
Joined: Sat Feb 22, 2014 10:06 pm

Re: Diagnoal Rod length

Postby Fester » Tue Mar 03, 2015 2:38 pm

Thank you .


Return to “ORION”

Who is online

Users browsing this forum: No registered users and 1 guest