Upgraded to 1.04, now trying to print off bed

Talk about the Repetier Host software here (http://repetier.com)
Sloth
Plasticator
Posts: 8
Joined: Thu Aug 07, 2014 6:32 pm

Upgraded to 1.04, now trying to print off bed

Postby Sloth » Sun Sep 14, 2014 8:40 pm

I upgraded to 1.04 and when I sliced my drawing it now wants to start the print way off the print area. Any idea why? What makes my head it hurt is from the image you see it knows it will be off the bed. I am running a Rockstock MAX V2 with .91 firmware. Nothing else has changed between yesterday and today other than the upgrade to Repetier Host 1.04. Worst case I can uninstall and go back to 1.01. Has anyone else seen this?
Attachments
slicer.jpg

Sloth
Plasticator
Posts: 8
Joined: Thu Aug 07, 2014 6:32 pm

Re: Upgraded to 1.04, now trying to print off bed

Postby Sloth » Tue Sep 16, 2014 10:24 am

I found the problem, during the upgrade it changed my printer settings. Changing them back to X home=0 Y home=0 Z home=max set fixed the problem.


Return to “Repetier Host”

Who is online

Users browsing this forum: No registered users and 1 guest