Increasing Max Temperature.

Talk about the Repetier Host software here (http://repetier.com)
Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1328
Joined: Sun May 11, 2014 6:18 pm

Increasing Max Temperature.

Postby Mac The Knife » Sun Jun 29, 2014 2:22 pm

Is the extruder temperature limited by Repetier? or is it limited in the firmware? And how do I change it?
R-Max V2
Eris
Folger Tech FT-5 R2

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Increasing Max Temperature.

Postby Eaglezsoar » Sun Jun 29, 2014 2:35 pm

Mac The Knife wrote:Is the extruder temperature limited by Repetier? or is it limited in the firmware? And how do I change it?

It is limited in firmware.
You need to edit your configuration.h looking for max_temp for the extruder (hotend)
See this link: viewtopic.php?f=60&t=5343
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1328
Joined: Sun May 11, 2014 6:18 pm

Re: Increasing Max Temperature.

Postby Mac The Knife » Sun Jun 29, 2014 3:40 pm

Now I see it. I had assumed it would be with the extruder settings, not below the bed settings. Line 575

Thanks.
R-Max V2
Eris
Folger Tech FT-5 R2

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Increasing Max Temperature.

Postby Eaglezsoar » Sun Jun 29, 2014 4:42 pm

Mac The Knife wrote:Now I see it. I had assumed it would be with the extruder settings, not below the bed settings. Line 575

Thanks.

I am just glad that you found it. Navigating those config files can be a bear, nothing is where you expect it to be.
Happy Printing!
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1328
Joined: Sun May 11, 2014 6:18 pm

Re: Increasing Max Temperature.

Postby Mac The Knife » Mon Jun 30, 2014 8:31 pm

Here's the next problem,,,,,, If I try to adjust the temperature while the printer is running, It drops to 240, and will not go back up. Is that also in the config h file?
R-Max V2
Eris
Folger Tech FT-5 R2

User avatar
Mike B
Printmaster!
Posts: 44
Joined: Wed May 21, 2014 1:10 pm
Location: West Lafayette, IN

Re: Increasing Max Temperature.

Postby Mike B » Fri Aug 22, 2014 8:40 pm

Knife,

Did you ever figure out a way around not being able to adjust the temp from the LCD? I am having the same issue. I can hit 275 through Repetier Host, but trying to adjust with LCD max is still 240.

Thanks!

Mike

User avatar
Mike B
Printmaster!
Posts: 44
Joined: Wed May 21, 2014 1:10 pm
Location: West Lafayette, IN

Re: Increasing Max Temperature.

Postby Mike B » Fri Aug 22, 2014 8:44 pm

Disregard! I found it in configuration.h under #define UI_SET_MAX_EXTRUDER_TEMP

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1328
Joined: Sun May 11, 2014 6:18 pm

Re: Increasing Max Temperature.

Postby Mac The Knife » Sat Aug 23, 2014 9:30 am

Sorry about that,, Yeah, that setting is down around line 900. They really make you hunt around for the settings.
R-Max V2
Eris
Folger Tech FT-5 R2

User avatar
dmo
Printmaster!
Posts: 55
Joined: Mon Nov 02, 2015 3:18 pm
Location: Washington, DC
Contact:

Re: Increasing Max Temperature.

Postby dmo » Thu Nov 19, 2015 7:07 pm

On mine it's line 1240, took a while to dig down there.


Return to “Repetier Host”

Who is online

Users browsing this forum: No registered users and 1 guest