Speed Multiply in Reptier-Host

Talk about the Repetier Host software here (http://repetier.com)
MashinoDesign
Plasticator
Posts: 14
Joined: Fri Jan 03, 2014 10:14 pm

Speed Multiply in Reptier-Host

Postby MashinoDesign » Tue Jan 14, 2014 2:39 pm

I have a question for you folks,

If I manually slow down the feed rate using the slider bar, should I also slow to the Flowrate proportionally? For example, if I slow the feed rate to 50%, should the flowrate be adjusted to 50% as well?

Tom

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5402
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: Speed Multiply in Reptier-Host

Postby mhackney » Tue Jan 14, 2014 3:13 pm

in general, no. If you slow the sped down 50% it will also lower the extruder speed.

You might want to tweak the flow rate to get better prints. For instance, if I am printing an object that has a base with thin walls or pillars, I might lower the flow on these details.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

Vic
Printmaster!
Posts: 57
Joined: Tue Mar 11, 2014 9:49 pm

Re: Speed Multiply in Reptier-Host

Postby Vic » Thu May 22, 2014 1:28 pm

I am sorry if I appear dense but I need some clarification. Is "feedrate" the rate of printing and "flowrate" the rate of extrusion?
Thanks

User avatar
geolupulus
Printmaster!
Posts: 67
Joined: Mon Apr 14, 2014 3:03 pm
Location: Albany NY

Re: Speed Multiply in Reptier-Host

Postby geolupulus » Thu May 22, 2014 1:37 pm

My understanding is that Feedrate is the rate of printing & extrusion(arm movement speed AS WELL as filament extrusion rate). It essentially speeds up both aspects of the print.

Flow rate operates separately, it's increasing the amount of filament extruded ONLY. It will cause an increase in the rate of filament extruded throughout the print. It will not change the speed of the printer's arms.

You can increase feedrate to print faster, you can increase flowrate to fill in gaps if the extruded filament isn't touching itself as the printer moves around on a layer. They can be used separately or together depending on your print's needs.

Keep in mind, if you print things more than once you will want to remember what corrections you're applying to your print so you can recreate that part in the same manner. It's probably best to reslice your model with your corrections and save that gcode when you're done. That way you have it all ready to go for the next time you print instead of having to go back to your notes.

If I am mistaken hopefully someone can point it out but I'm pretty sure that's how it goes.

Vic
Printmaster!
Posts: 57
Joined: Tue Mar 11, 2014 9:49 pm

Re: Speed Multiply in Reptier-Host

Postby Vic » Thu May 22, 2014 10:29 pm

Thanks for the explanation.


Return to “Repetier Host”

Who is online

Users browsing this forum: No registered users and 1 guest