Checksum errors

Talk about the Repetier Host software here (http://repetier.com)
Post Reply
User avatar
foshon
Printmaster!
Posts: 605
Joined: Fri Mar 08, 2013 3:05 pm
Location: Just to the right of SeeMeCNC

Checksum errors

Post by foshon » Wed Jun 12, 2013 3:14 pm

Last week I made a change to my firmware, enabling dual extruders. Since then, I have been receiving checksum errors. They do not seem to effect the print as I just finished a 7 hour monster this morning. Any ideas?
Purple = sarcasm

Please do a board search before posting your question, many have been answered with very time consuming detail already.

User avatar
JohnStack
Printmaster!
Posts: 852
Joined: Thu Jan 03, 2013 7:07 pm
Location: Carlsbad, CA
Contact:

Re: Checksum errors

Post by JohnStack » Wed Jun 12, 2013 8:27 pm

First, no idea.

Second, I wanna see pics and a write up about how you enabled the dual extruders. Start to finish...lol
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a

User avatar
cpunches
Printmaster!
Posts: 128
Joined: Tue Apr 09, 2013 6:24 pm
Location: Southaven, MS
Contact:

Re: Checksum errors

Post by cpunches » Thu Jun 13, 2013 11:24 am

Foshon I read somewhere that those can be result of "line noise" in the USB cable. I get the same error periodically and it hasn't seemed to affect any of the print jobs. I do occasionally move the cable around and away from any other wires (like the hotend or extruder wires) running to the RAMBO.

User avatar
foshon
Printmaster!
Posts: 605
Joined: Fri Mar 08, 2013 3:05 pm
Location: Just to the right of SeeMeCNC

Re: Checksum errors

Post by foshon » Fri Jun 14, 2013 7:57 pm

cpunches wrote:Foshon I read somewhere that those can be result of "line noise" in the USB cable. I get the same error periodically and it hasn't seemed to affect any of the print jobs. I do occasionally move the cable around and away from any other wires (like the hotend or extruder wires) running to the RAMBO.



I will tinker with this, thanks! BTW you can call me Neil. :)
Purple = sarcasm

Please do a board search before posting your question, many have been answered with very time consuming detail already.

Post Reply

Return to “Repetier Host”