Cura 3.0.3

Talk about Cura software here (http://wiki.ultimaker.com/Cura)
User avatar
Roberts_Clif
Plasticator
Posts: 10
Joined: Mon Oct 23, 2017 10:51 am

Cura 3.0.3

Postby Roberts_Clif » Wed Oct 25, 2017 9:20 am

Was looking into Cura and found the the Latest version has not been listed here .

Version Version: 3.0 64 bit Release date: 10/17/17 is actually version 3.0.3

https://ultimaker.com/en/products/cura-software/list

User avatar
Roberts_Clif
Plasticator
Posts: 10
Joined: Mon Oct 23, 2017 10:51 am

Re: Cura 3.0.3

Postby Roberts_Clif » Wed Oct 25, 2017 11:23 am

Cura seems to be gaining in popularity since all of it's enhancements over this last year.
With features like "Top surface skin", "Ironing (a.k.a. Neosanding)", "Print thin walls", "Gradual support infill." and "infill layer thickness" this Allows you to set an outer layer of thickness .14 while also setting the infill layer thickness of .28. This gives you a really smooth finish and at the same time allows model to have a strong infill thickness of .28 allowing for stronger, faster prints.

https://ultimaker.com/en/blog/51439-wel ... er-cura-30


Return to “Cura”

Who is online

Users browsing this forum: No registered users and 1 guest