Rambo and the Viki Display

The RAMBo board is finally here, and here's a place to talk about it!
Post Reply
User avatar
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Rambo and the Viki Display

Post by Eaglezsoar » Mon Nov 16, 2015 7:14 pm

Has anyone successfully interfaced the Pannucatt Viki display with the Rambo controller and if so could you briefly tell us what needs to
be done to make it work?

Posts: 726
Joined: Sat Aug 18, 2012 4:09 am
Location: Chula Vista, CA

Re: Rambo and the Viki Display

Post by Eric » Mon Nov 16, 2015 7:59 pm

There's nothing about the hardware that's incompatible. It's all about firmware support, and there are many firmware choices.

In Repetier it appears to be supported. Set FEATURE_CONTROLLER to 5 in "configuration.h". Also make sure pin assignments in "ui.h" are correct for whatever rambo pins you choose to use.

Can't help much beyond glancing at the code, as I don't own either a Rambo or a Viki.

Post Reply

Return to “RAMBo”