ZERO LASH Straps for Trick laser CF arms

bvandiepenbos · Post by **bvandiepenbos** » Thu May 23, 2013 4:39 am

Hey guys, anybody who has the CF Arms from Trick Laser can upgrade them to be even better.
http://www.tricklaser.com/Zero-Lash-Straps-RM-ZLASH.htm

Make them ZERO LASH just like the magnetic ball joints!

foshon · Post by **foshon** » Thu May 23, 2013 9:38 am

Is the price for 1 or a kit?

bvandiepenbos · Post by **bvandiepenbos** » Thu May 23, 2013 11:10 am

foshon wrote:Is the price for 1 or a kit?

Price is for set of (6) straps

626Pilot · Post by **626Pilot** » Sat May 25, 2013 2:20 am

Can I just do the same thing with some thick rubber bands?

foshon · Post by **foshon** » Sat May 25, 2013 7:44 am

626Pilot wrote:Can I just do the same thing with some thick rubber bands?

I weighed that option as well, for me the 5 dollars more than covered the pain in the arse of taking my arms off again.

lordbinky · Post by **lordbinky** » Sat May 25, 2013 2:35 pm

Or someone can experiment with zip ties. Make it the thunderdome of fasteners.

cambo3d · Post by **cambo3d** » Sat May 25, 2013 3:08 pm

zip ties wont work, it needs to be elastic/stretchable to maintain tension on the rod joints at all ranges of travel.

they have good solution, although i think it should've been included with the kit.

ApacheXMD · Post by **ApacheXMD** » Sat May 25, 2013 3:20 pm

How bout using a zip tie as a link to tie the ends of a regular rubber band together.
Wrap the band around the arms, zip tie the ends

bvandiepenbos · Post by **bvandiepenbos** » Sat May 25, 2013 10:21 pm

cambo3d wrote:zip ties wont work, it needs to be elastic/stretchable to maintain tension on the rod joints at all ranges of travel.

they have good solution, although i think it should've been included with the kit.

Hey Cambo, as of last monday we are including them standard with the arm kits. And they are available for previous owners to upgrade their arms for a minimal cost on our website. ( only $5.00 with free shipping)

Yes, you can use rubber bands. It needs to be elastic.

We use a soft stretchy latex rubber tubing and a laser cut connecting barb.

Welcome to the SeeMeCNC Community

ZERO LASH Straps for Trick laser CF arms

ZERO LASH Straps for Trick laser CF arms

Re: ZERO LASH Starps for Trick laser CF arms

Re: ZERO LASH Starps for Trick laser CF arms

Re: ZERO LASH Straps for Trick laser CF arms

Re: ZERO LASH Straps for Trick laser CF arms

Re: ZERO LASH Straps for Trick laser CF arms

Re: ZERO LASH Straps for Trick laser CF arms

Re: ZERO LASH Straps for Trick laser CF arms

Re: ZERO LASH Straps for Trick laser CF arms