The Ultimate Rostock Thing Collection

All things related to the Rostock MAX 3D Printer, the worlds FIRST Delta kit!
krak
Prints-a-lot
Posts: 30
Joined: Fri May 24, 2013 10:39 pm
Location: Bellevue Wa

Re: The Ultimate Rostock Thing Collection

Postby krak » Tue Aug 27, 2013 6:33 pm

krak wrote:I printed this out last week. The 40mm fan just came in. When the current print is finished I plan on installing this and the 25mm fan. :D

The 25 hour print finished late last night. Pretty good for a hobby level printer. Now I have the 25mm fan pointed at the hot end, and 40 mm fan duct installed. Which unit should be considered Fan 0 and Fan 1? Where do I need to be looking in the software to control Fan 1?

Oh and so far the fans seem to be pretty well balanced.

Edit: I started a new thread about fan questions to keep this thread a little cleaner.
http://forum.seemecnc.com/viewtopic.php?f=54&t=2485

doctorgonzo
Printmaster!
Posts: 108
Joined: Thu May 16, 2013 7:46 am
Location: Atlanta GA

Re: The Ultimate Rostock Thing Collection

Postby doctorgonzo » Wed Sep 04, 2013 9:41 pm

How about a PWM-controlled solenoid powered by the shop compressor? Is that overkill? I mean, I could just stand around with a straw and blow. I really like the fan shroud, it will probably be one of the first things I print. Thanks.

-Doc

edward
Printmaster!
Posts: 207
Joined: Mon Jun 03, 2013 8:55 am
Location: Fort Wayne, IN
Contact:

Re: The Ultimate Rostock Thing Collection

Postby edward » Wed Sep 04, 2013 9:57 pm

doctorgonzo wrote:How about a PWM-controlled solenoid powered by the shop compressor? Is that overkill? I mean, I could just stand around with a straw and blow. I really like the fan shroud, it will probably be one of the first things I print. Thanks.

-Doc


I'm not sure if solenoids would like that high frequency operation, or if they could operate fast enough mechanically. I only say this based on awareness of projects in both the hydraulic and automotive industries that are attempting to create PWM valves for "throttle-less" circuits. In both cases I know of research efforts that spanned multiple years.

I'm sure it would certainly provide all the flow you need, though...
My Thingiverse profile: http://www.thingiverse.com/edwardh

User avatar
626Pilot
ULTIMATE 3D JEDDI
Posts: 1719
Joined: Tue May 14, 2013 12:52 pm

Re: The Ultimate Rostock Thing Collection

Postby 626Pilot » Mon Sep 09, 2013 8:17 am

Rostock MAX Tower Alignment Brace

If you've ever done a tower alignment and thought, "This would be a lot easier if I had two or three friends to hold things very firmly in place," these clamps are for you. I got the idea from someone else on the forums, but I don't remember who it was.
Attachments
626 Tower Alignment Brace.png

User avatar
MSURunner
Printmaster!
Posts: 200
Joined: Thu Jan 03, 2013 1:28 pm

Re: The Ultimate Rostock Thing Collection

Postby MSURunner » Thu Sep 12, 2013 9:57 am

JohnStack wrote:
MSURunner wrote:Here's the updated fan shroud, 50 mm setup still... http://www.thingiverse.com/thing:74789

I'll crank out a 40 soon


You printed the example out with a dual head? Can you go into that a bit somewhere?



Single head, just placed a bit of black filament in the bowden, followed by some orange and fed the black spool in later.

Mhagan
Plasticator
Posts: 7
Joined: Tue Oct 01, 2013 10:49 am

Re: The Ultimate Rostock Thing Collection

Postby Mhagan » Sat Oct 26, 2013 11:46 am

I have been working on an enclosure for my Rostock Max. I noticed that a 12x24" sheet of acrylic fits rather nicely between the skates and really leaves a 1.75" gap on the top and bottom. This is really nice for me because I live in an apartment and using a panel saw to cut down a larger sheet in my living room would probably be frowned upon. The printer is with my wife right now doing a demonstration and I will post pictures as soon as she gets back. For now, you will all have to settle for the skeleton Thingiverse page. http://www.thingiverse.com/thing:172116

ccavanaugh
Printmaster!
Posts: 298
Joined: Wed Dec 12, 2012 5:03 pm
Location: Indiana

Re: The Ultimate Rostock Thing Collection

Postby ccavanaugh » Sat Oct 26, 2013 2:34 pm

Looking forward to seeing the end result.

I've been working on a design for a enclosed delta based around seemecnc parts. After calculating out print time on my old h1-1 to be over 120 hours, I cried uncle and just ordered a new Rostock MAX with the intention of adding an enclosure mod.

I'm trying to print in a garage at 50 F and want to keep the heat in. I'm planning on adding a beaglebone or raspberry pi with a CO sensor as a safety device for unattended prints. The enclosure will aid in detection of the CO.

cjdavis618
Printmaster!
Posts: 78
Joined: Mon Feb 18, 2013 4:08 pm

Re: The Ultimate Rostock Thing Collection

Postby cjdavis618 » Tue Jan 07, 2014 10:57 pm

Thought I would post my easy LED light ring.

http://www.thingiverse.com/thing:204581

Just used 2 sections from a 300smd 12volt led light strip and then glued it to the inside rim. Used Loctite's Go2 Glue and it has held up great for about 50 hours of printing in close proximity to the hotend. This is designed to work with the single hotend stock Rostock max. I have it wired to the fan so they both come on at once since I always run the peek fan at 100% anyway. Leaves 2mm of clearance from the rim to the print surface so no issues dragging parts or anything.

Uses factory screws and no modifications are needed.

Image
Image
Image

int2str
Printmaster!
Posts: 196
Joined: Tue Nov 19, 2013 8:38 pm

Re: The Ultimate Rostock Thing Collection

Postby int2str » Tue Jan 07, 2014 11:21 pm

cjdavis618 wrote:Thought I would post my easy LED light ring.
http://www.thingiverse.com/thing:204581


Very neat!

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: The Ultimate Rostock Thing Collection

Postby mhackney » Wed Jan 08, 2014 8:20 am

Neat and I added it to the collection, thanks!

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: The Ultimate Rostock Thing Collection

Postby Eaglezsoar » Wed Jan 08, 2014 9:13 am

That is a very bright light. Good job!
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

User avatar
JolietDelta
Plasticator
Posts: 17
Joined: Sun Jan 05, 2014 8:39 am
Location: Stuttgart / Germany

Re: The Ultimate Rostock Thing Collection

Postby JolietDelta » Wed Jan 15, 2014 10:42 am

Aaand... here comes my humble contribution.
I've designed a dual extrution mount with integrated cooling. It is for use with the stock seemecnc hot ends.
http://www.thingiverse.com/thing:214536

Have fun. :-)

~Jens

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: The Ultimate Rostock Thing Collection

Postby mhackney » Wed Jan 15, 2014 11:02 am

Added.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: The Ultimate Rostock Thing Collection

Postby Eaglezsoar » Wed Jan 15, 2014 11:03 am

JolietDelta wrote:Aaand... here comes my humble contribution.
I've designed a dual extrution mount with integrated cooling. It is for use with the stock seemecnc hot ends.
http://www.thingiverse.com/thing:214536

Have fun. :-)

~Jens

Your contribution is appreciated and can be very useful for the users who want to use the stock hot-ends in a dual mount configuration.
Thanks for contributing.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: The Ultimate Rostock Thing Collection

Postby mhackney » Thu Jan 30, 2014 12:48 pm

I've uploaded my E3D - Bowden mounting adapter for the Rostock Max and added it to the collection.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: The Ultimate Rostock Thing Collection

Postby mhackney » Fri Jan 31, 2014 3:21 pm

I just completed these Rostock Max Tool Caddies and uploaded them to Thingiverse. They are in the collection too.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
Batteau62
Printmaster!
Posts: 399
Joined: Wed Apr 03, 2013 12:36 pm
Location: Connecticut

Re: The Ultimate Rostock Thing Collection

Postby Batteau62 » Fri Jan 31, 2014 3:24 pm

Nice! and those zebra clips are da bomb! :D
-"Simpler is better, except when complicated looks really cool."
-"As soon as you make something fool proof...along comes an idiot."
-"I have not failed. I've just found 10,000 ways that won't work." ~Thomas Edison

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: The Ultimate Rostock Thing Collection

Postby mhackney » Fri Jan 31, 2014 3:30 pm

Yeah, I love the zebra clips. The two back by the Onyx electrical connector are red.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

Bill Havins
Printmaster!
Posts: 88
Joined: Sun Mar 03, 2013 6:46 pm
Location: Abilene, Texas
Contact:

Re: The Ultimate Rostock Thing Collection

Postby Bill Havins » Fri Feb 07, 2014 7:11 am

mhackney,

Thanks for developing the collection! Here is one to add: http://www.thingiverse.com/thing:243270. It is a very simple Dual Hotend Mounting.

I will report progress with dual hotends in this thread: http://forum.seemecnc.com/viewtopic.php?f=36&t=2152&p=28885#p28885.

Bill
"So many windmills, so little time." - Don Quixote

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: The Ultimate Rostock Thing Collection

Postby mhackney » Fri Feb 07, 2014 8:29 am

Added it Bill, thanks.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: The Ultimate Rostock Thing Collection

Postby bubbasnow » Sun Feb 09, 2014 4:31 am

i made a 40mm fan mount to be used with your e3d mount or any similar. this acts as a 41mm spacer that leaves about 9mm of nozzle/platform clearance below.
Attachments
e3d_mount.STL
(140.32 KiB) Downloaded 50 times
backspacer.STL
(15.32 KiB) Downloaded 54 times
e3d_fan.JPG

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: The Ultimate Rostock Thing Collection

Postby Eaglezsoar » Sun Feb 09, 2014 6:45 am

Thank you! Which mount has this been tested with?

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: The Ultimate Rostock Thing Collection

Postby mhackney » Sun Feb 09, 2014 9:27 am

That's "cool". I like the splitter back post.

cheers,
Michael

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: The Ultimate Rostock Thing Collection

Postby bubbasnow » Sun Feb 09, 2014 2:42 pm

Eaglezsoar wrote:Thank you! Which mount has this been tested with?


The one Michael posted a few weeks ago, but im sure it would worth with pilots as well

User avatar
DavidF
Printmaster!
Posts: 778
Joined: Thu Aug 29, 2013 12:12 pm
Location: Delaware

Re: The Ultimate Rostock Thing Collection

Postby DavidF » Mon Sep 01, 2014 11:32 am

Working on a new J head mount, this one is much better than my previous design. Thi one should be a direct bolt in without having to source screws or anything.
I havent tried it yet, its printing now I will let you know how it comes out.
Attachments
Jmounttop2.stl
(695.74 KiB) Downloaded 45 times
Jmount2.stl
(805.36 KiB) Downloaded 46 times
http://www.youtube.com/user/aonemarine
Lost pla castings? see me


Return to “Rostock MAX”

Who is online

Users browsing this forum: No registered users and 4 guests