WHAT WITCHCRAFT IS THIS?!

Start your own build thread so others can see how it's going, and even help out!
Post Reply
User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4975
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

WHAT WITCHCRAFT IS THIS?!

Post by geneb » Sun Nov 08, 2015 3:32 pm

fig6.8-1.jpg



fig18.4-5.jpg




MUAHAHAHAHAHAHA!


g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
forrie
Printmaster!
Posts: 159
Joined: Wed Apr 16, 2014 7:15 am
Location: Crab Nebula

Re: WHAT WITCHCRAFT IS THIS?!

Post by forrie » Sun Nov 08, 2015 3:35 pm

What's this.. a new stock power supply?
I'm not an alcoholic...I'm Australian!

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4975
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: WHAT WITCHCRAFT IS THIS?!

Post by geneb » Sun Nov 08, 2015 3:40 pm

I could tell you, but then I'd have to make you use a Makerbot. :D

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1561
Joined: Wed Sep 23, 2015 2:55 pm

Re: WHAT WITCHCRAFT IS THIS?!

Post by Xenocrates » Sun Nov 08, 2015 5:30 pm

If that's a 24V power supply stock, then I am very much want. Although I wish it weren't using a side panel for the plug, ETC, as I like clean lines, and also kinda planned to have a cable duct living on the two non-door sides.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router

Sic Transit Gloria Mundi
01-10011-11111100001

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1370
Joined: Sun May 11, 2014 6:18 pm

Re: WHAT WITCHCRAFT IS THIS?!

Post by Mac The Knife » Sun Nov 08, 2015 6:06 pm

The 12 volt supply works very well also. Alot better then a PC PSU. I cannibalized a powersupply for the back panel, for the power cord, and used the kits power switch to switch the mains.
R-Max V2
Eris
Folger Tech FT-5 R2

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1157
Joined: Thu Dec 04, 2014 6:06 pm

Re: WHAT WITCHCRAFT IS THIS?!

Post by KAS » Sun Nov 08, 2015 6:20 pm

Slots in the base are different from the v2.

Of course the images give away the instruction changes, specifically:
fig6.8-1 & fig18.4-5

IMBoring25
Printmaster!
Posts: 616
Joined: Wed Mar 18, 2015 1:11 am

Re: WHAT WITCHCRAFT IS THIS?!

Post by IMBoring25 » Sun Nov 08, 2015 6:21 pm

You can print covers for the LED PSUs. Designed appropriately, you can integrate them however/wherever you want. My Mendel came with one, then I designed one for a 30A upgrade and then one for a 24V upgrade

User avatar
bot
Printmaster!
Posts: 993
Joined: Thu Sep 25, 2014 12:18 am
Location: Vancouver
Contact:

Re: WHAT WITCHCRAFT IS THIS?!

Post by bot » Sun Nov 08, 2015 6:29 pm

I wish they made 24v ATX PSUs.
*not actually a robot

Post Reply

Return to “The Build Zone”