rostock max v3, solder bridge

Start your own build thread so others can see how it's going, and even help out!
clever_rogue
Noob
Posts: 3
Joined: Thu Feb 22, 2018 11:43 pm

rostock max v3, solder bridge

Postby clever_rogue » Tue Feb 27, 2018 12:32 pm

Hi everyone,

I'm at the home stretch of my build and wanted to confirm something: during Step 4 Final Assembly, Step 29 of a rev10 bed, Step 5 mentions bridging the two solder pads as shown and has red arrow pointing to 2+ and diagonal pad, but the subsequent image doesn't show any pad bridged together. I wanted to verify if I'm only bridging 2+ with the diagonal pad or if I'm bridging 1+ and 2+ pads using the diagonal pad?
Attachments
thumbnail_Screenshot_20180226-055401.jpg

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4717
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: rostock max v3, solder bridge

Postby geneb » Tue Feb 27, 2018 12:52 pm

The photos may have been taken out of order. Follow the text and you'll be fine.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

clever_rogue
Noob
Posts: 3
Joined: Thu Feb 22, 2018 11:43 pm

Re: rostock max v3, solder bridge

Postby clever_rogue » Tue Feb 27, 2018 2:23 pm

I guess the crux of it is if they're counting that diagonal strip as a pad, therefore solder the diagonal pad and 2+ pad together, or if they mean bridge 1+ and 2+ together using the diagonal strip, but there's no picture to help conform what is intended.

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4717
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: rostock max v3, solder bridge

Postby geneb » Tue Feb 27, 2018 2:55 pm

It's very clear - bridge only the two pads that are "linked" by the red line.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects


Return to “The Build Zone”

Who is online

Users browsing this forum: No registered users and 3 guests