Extra Parts Check (Rostock max v3)

Start your own build thread so others can see how it's going, and even help out!
mermaldad
Noob
Posts: 2
Joined: Wed Dec 14, 2016 8:58 am

Extra Parts Check (Rostock max v3)

Postby mermaldad » Thu Dec 15, 2016 8:25 pm

I just finished the build on my Rostock max v3, and I ended up with parts left over. I understand that there may be parts that were for the v2, but I'd appreciate it if someone in the group could take a look at my pile of parts and reassure me that I didn't miss anything. The linked picture shows the pile. The stuff to the right are things I'm most sure are just leftovers. I'm most concerned about the three black brackets on the left and the bag of connectors.

https://drive.google.com/open?id=0B7aVeXDwRaKjRXpHWXUwdERxbVE

Thanks!
Rostock Max v3 (my first 3D printer)

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1493
Joined: Wed Sep 23, 2015 2:55 pm

Re: Extra Parts Check (Rostock max v3)

Postby Xenocrates » Thu Dec 15, 2016 9:12 pm

Yeah. That's all safe stuff to have left over. The black brackets are a hold over from the first introduction of injection molded carraiges to the V2, before the ball joint arms. The extra connectors are from the bag Ultimachine packs and provides to Seeme.
Machines:
Rostock Max V2, 760W corsair modular PSU, PT100 enabled E3D V6 and volcano, self adjusting carriages, Raymond style enclosure
Automation Technology 60W laser cutter/engraver

Sic Transit Gloria Mundi
01-10011-11111100001

mermaldad
Noob
Posts: 2
Joined: Wed Dec 14, 2016 8:58 am

Re: Extra Parts Check (Rostock max v3)

Postby mermaldad » Thu Dec 15, 2016 9:26 pm

Thanks, Xenocrates! I'll sleep a little better tonight.
Rostock Max v3 (my first 3D printer)


Return to “The Build Zone”

Who is online

Users browsing this forum: No registered users and 2 guests