mhackney's Rostock Max V3

Start your own build thread so others can see how it's going, and even help out!
User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

mhackney's Rostock Max V3

Postby mhackney » Wed Sep 21, 2016 3:12 pm

I just put in my order for a black V3 with some extra items. Let's see how long it takes this thread to beat the 100,000 views my original Rostock Max V1 build thread has!

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4603
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: mhackney's Rostock Max V3

Postby geneb » Wed Sep 21, 2016 4:41 pm

It won't take you nearly that long to build it. :)

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: mhackney's Rostock Max V3

Postby mhackney » Wed Sep 21, 2016 4:46 pm

Hopefully. I hear there is actually a good assembly manual now :)

Actually, I was reading through the Dozuki stuff. Very nicely done and I like Dozuki. In fact, I just started using it today to create the assembly instructions for my new version 5 fly fishing reels (my aluminum ones, not the 3D printed ones). I'll do one for the 3D printed reels next.

Are you going to the NY Maker Faire in Oct? I'm gonna be there.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4603
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: mhackney's Rostock Max V3

Postby geneb » Wed Sep 21, 2016 5:48 pm

Let's just say I wasn't a fan initially. :D (and the dozuki devs get really pissy when you call them out when they make stupid mistakes - Last year I tried uploading an image and their little back end system told me I didn't own the image! Considering I JUST copied it off the camera's SD card, I was rather annoyed. I emailed their support team and told them whatever idiot thought up the assinine idea in the first place should be shot in the parking lot as a warning to others. One of the little snots actually called me to take me to task for my comment! )

As a platform I can work with it, but the artificial constraints are annoying. (so is the inability to re-order bullet points. I guess they decided development efforts towards accusing people of copyright infringement was more important than than being able to re-order bullet points...*ahem* - and yes, I'm still pissed off about it. :D )

Not going to NY - I'm allergic to population densities that high. :)

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: mhackney's Rostock Max V3

Postby mhackney » Wed Sep 21, 2016 5:58 pm

I just plowed through my manual - had all the photos and videos ready - and it went pretty quickly. There are a few wrinkles but it wasn't too bad overall.

I think I have the perfect name for my new V3, I'll call it GeneBee. Imagine the confusion!
"I calibrated GeneBee today using the calibration steps in geneb's manual."
"I ran my first 100 kilos through GeneBee!"
"GeneBee/geneb is a crotchety old so and so."

I like it.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
Nylocke
ULTIMATE 3D JEDDI
Posts: 1421
Joined: Sun Jun 23, 2013 1:43 pm
Location: Iowa

Re: mhackney's Rostock Max V3

Postby Nylocke » Wed Sep 21, 2016 9:31 pm

I'm a big fan of how Aleph/Lulzbot's documentation looks (OHAI-kit). I checked out the GitHub and the setup is definitely more on the do everything yourself end of things but it seems pretty flexible, though I don't have much to compare it to.

User avatar
joe
Printmaster!
Posts: 263
Joined: Tue Jun 28, 2016 10:05 pm

Re: mhackney's Rostock Max V3

Postby joe » Wed Sep 21, 2016 10:09 pm

mhackney wrote:I just put in my order for a black V3 with some extra items. Let's see how long it takes this thread to beat the 100,000 views my original Rostock Max V1 build thread has!


Is someone's head a little big?

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: mhackney's Rostock Max V3

Postby mhackney » Wed Sep 21, 2016 10:14 pm

Just sayin...

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: mhackney's Rostock Max V3

Postby Eaglezsoar » Thu Sep 22, 2016 6:35 am

His head is not too big but it does contain a lot of knowledge.
Knowledge that he willingly shares with the communities that he is on.
I am looking forward to Mhackney's build thread of the V3.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1155
Joined: Thu Dec 04, 2014 6:06 pm

Re: mhackney's Rostock Max V3

Postby KAS » Thu Sep 22, 2016 6:52 am

pics or it didn't happen...

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: mhackney's Rostock Max V3

Postby mhackney » Thu Sep 22, 2016 6:59 am

LOL! Touché.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4603
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: mhackney's Rostock Max V3

Postby geneb » Thu Sep 22, 2016 9:35 am

*looks at watch, taps foot impatiently*

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Mac The Knife
ULTIMATE 3D JEDDI
Posts: 1317
Joined: Sun May 11, 2014 6:18 pm

Re: mhackney's Rostock Max V3

Postby Mac The Knife » Thu Sep 22, 2016 2:15 pm

Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet? Is it done yet?
R-Max V2
Eris
Folger Tech FT-5 R2

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1155
Joined: Thu Dec 04, 2014 6:06 pm

Re: mhackney's Rostock Max V3

Postby KAS » Thu Sep 22, 2016 2:28 pm

I'm working on the view count. Goal is 100,000 before he gets his v3....

User avatar
Tincho85
Printmaster!
Posts: 659
Joined: Sun Nov 03, 2013 12:27 pm
Location: Buenos Aires, Argentina

Re: mhackney's Rostock Max V3

Postby Tincho85 » Thu Sep 22, 2016 2:38 pm

I'm hitting F5 to help a bit.
Martín S.

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1474
Joined: Wed Sep 23, 2015 2:55 pm

Re: mhackney's Rostock Max V3

Postby Xenocrates » Thu Sep 22, 2016 3:01 pm

KAS wrote:I'm working on the view count. Goal is 100,000 before he gets his v3....

I think we might need an instance of LOIC to manage that. And I'm pretty darned sure Seeme would not appreciate us knocking over there server with it. But it would be funny.
Machines:
Rostock Max V2, 760W corsair modular PSU, PT100 enabled E3D V6 and volcano, self adjusting carriages, Raymond style enclosure
Automation Technology 60W laser cutter/engraver

Sic Transit Gloria Mundi
01-10011-11111100001

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1155
Joined: Thu Dec 04, 2014 6:06 pm

Re: mhackney's Rostock Max V3

Postby KAS » Thu Sep 22, 2016 3:05 pm

I'm playing nice :)

User avatar
joe
Printmaster!
Posts: 263
Joined: Tue Jun 28, 2016 10:05 pm

Re: mhackney's Rostock Max V3

Postby joe » Thu Sep 22, 2016 3:11 pm

He will be lucky to get that big head through a door now!

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: mhackney's Rostock Max V3

Postby mhackney » Thu Sep 22, 2016 5:45 pm

Seriously, 16,000 views and not a single photo or any information related to the V3! I'll keep this thread alive until my V3 kit arrives, then I'll lock this one and start a new one for the SERIOUS work! I got a few goodies too like an extra accelerometer probe. I've already started looking through the Repetier firmware to see how it integrates. I'd like to get the accelerometer to work with the Duet firmware although my plan is to leave this printer stock for as long as I can stand it.

@joe, already taken care of - double wide doors throughout my house. I told my wife it was for moving my machines around but we all know the real reason.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1155
Joined: Thu Dec 04, 2014 6:06 pm

Re: mhackney's Rostock Max V3

Postby KAS » Thu Sep 22, 2016 5:51 pm

LOL, yea I started at 0700 with 215 views. It would take about 48 hours with my macro.

But, I've stopped. I don't wanna piss anyone off with the hammering non-stop.


Untitled.png
Last edited by KAS on Thu Sep 22, 2016 5:53 pm, edited 1 time in total.

User avatar
joe
Printmaster!
Posts: 263
Joined: Tue Jun 28, 2016 10:05 pm

Re: mhackney's Rostock Max V3

Postby joe » Thu Sep 22, 2016 5:52 pm

mhackney wrote:@joe, already taken care of - double wide doors throughout my house. I told my wife it was for moving my machines around but we all know the real reason.


:D :lol: that's good. Just joking around :D

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: mhackney's Rostock Max V3

Postby mhackney » Thu Sep 22, 2016 5:54 pm

Yeah, good idea! I'm emailing Oly and Steve to apologize. I'm sure they'll think it's funny.

@joe, no worries I have a thick head to go with it's massive size.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1155
Joined: Thu Dec 04, 2014 6:06 pm

Re: mhackney's Rostock Max V3

Postby KAS » Thu Sep 22, 2016 6:00 pm

Shouldn't be too bad, 3 unique views a second with image-less browser settings.

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: mhackney's Rostock Max V3

Postby mhackney » Thu Sep 22, 2016 6:03 pm

Not that there are any images in this thread yet! Well, yours I guess.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1155
Joined: Thu Dec 04, 2014 6:06 pm

Re: mhackney's Rostock Max V3

Postby KAS » Thu Sep 22, 2016 6:11 pm

lots of images from the HTML standpoint. Theme, logo, buttons, member pics etc..


But I was trying to get 100k before you logged back on. That wasn't happening so I quit.


Return to “The Build Zone”

Who is online

Users browsing this forum: No registered users and 2 guests