dual e3d v5 mount for rMaxV1 with abs parallel 2 y axis easy

Show off your latest creations, whether 3D printed or not
User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

dual e3d v5 mount for rMaxV1 with abs parallel 2 y axis easy

Postby bubbasnow » Sat Mar 15, 2014 2:08 am

ive started my dual e3d's

Image

Image

Image
Last edited by bubbasnow on Sat Jun 07, 2014 1:53 pm, edited 2 times in total.

User avatar
McSlappy
Printmaster!
Posts: 809
Joined: Wed Dec 11, 2013 9:11 pm
Location: Queensland, Australia
Contact:

Re: dual e3d

Postby McSlappy » Sat Mar 15, 2014 3:06 am

Ha ha! I'm excited!
I loved my Rostock so much I now sell them in Oz :)

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: dual e3d

Postby Eaglezsoar » Sat Mar 15, 2014 1:45 pm

bubbasnow wrote:ive started my dual e3d's


Are the components you printed a Thingiverse item? They look really nice.

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Sat Mar 15, 2014 2:09 pm

nope i made them

User avatar
Glacian22
Printmaster!
Posts: 325
Joined: Thu Apr 04, 2013 6:07 am
Location: Seattle

Re: dual e3d

Postby Glacian22 » Sat Mar 15, 2014 4:23 pm

bubbasnow wrote:nope i made them


Well y'know, sharing is caring. :D

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Sat Mar 15, 2014 5:08 pm

gotta get it going first, they might not work well in this revision...i dont want to share something useless!

User avatar
Tinyhead
Printmaster!
Posts: 440
Joined: Thu Jan 23, 2014 11:44 pm
Location: Manitoba, Canada

Re: dual e3d

Postby Tinyhead » Sat Mar 15, 2014 5:19 pm

Those parts look super nice.

Christian79
Printmaster!
Posts: 93
Joined: Mon Jun 03, 2013 12:25 pm

Re: dual e3d

Postby Christian79 » Thu Mar 20, 2014 3:34 am

Being a perfectionist myself, I get what you are saying. But one of the best things about a community like ours is "group development", you never know what the user population will come up with.

bubbasnow wrote:gotta get it going first, they might not work well in this revision...i dont want to share something useless!

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Thu Mar 20, 2014 10:56 am

well these work so ill post the files tonight when i get home. i do have a few pix

Image
This is my solution to the dual ezstruder.

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Thu Mar 20, 2014 11:07 am

my first print with extruder 2 doing support

Image

User avatar
edge922
Prints-a-lot
Posts: 32
Joined: Tue Mar 18, 2014 12:55 pm
Location: New Carlisle, IN

Re: dual e3d

Postby edge922 » Fri Mar 21, 2014 1:12 am

Would it be possible to mount them above for more Z clearance or is there no way to fit them that way.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Follow My Rostock MAX V2 Build in progress.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Fri Mar 21, 2014 9:51 am

edge922 wrote:Would it be possible to mount them above for more Z clearance or is there no way to fit them that way.


not with the stock effector plate :(

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Fri Mar 21, 2014 10:24 pm

ok here are my files

with this design follow the described order for proper installation.

1. slide both hot ends into the slots
2. snap 1 side of the fan shroud onto the collar just above the top cooling fins.
3. rotate the fan shroud until the second extruder snaps into place.
4. put the clamp over the top of the nozzles to lock them in place.
5. tighten down the ptc connectors all the way and cut the extra plastic flange off of the outside, this is a tight fit and is required to get these to not bind inside the effector plate
Image
6. insert screws through head before installation of the fans because they will block the holes, i use a couple tiny drops of superglue instead of screws to hold the 30mm fans in place.
Image
7. install the nozzles so they are parallel with the Y axis (6 holes in the effector plate this makes offset in firmware easiest).
8. if shimming is required just loosen the two screws on the nozzle that needs adjustment and insert shim between effector plate and clamp.


let me know if any additional info is needed.

another photo
Image
Attachments
duale3dslot.STL
(87.39 KiB) Downloaded 47 times
duale3dclamp.STL
(114.14 KiB) Downloaded 40 times
duale3dfan.STL
(899.98 KiB) Downloaded 44 times
duale3dclamp.SLDPRT
(125.5 KiB) Downloaded 49 times
duale3dfan.SLDPRT
(370 KiB) Downloaded 49 times
duale3dslot.SLDPRT
(127.5 KiB) Downloaded 55 times

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: dual e3d

Postby Eaglezsoar » Sat Mar 22, 2014 7:18 am

Thank you for posting the files. This is the best setup I have seen and certainly better than anything I have
seen on Thingiverse.

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: dual e3d

Postby Eaglezsoar » Sat Mar 22, 2014 7:49 am

What is the offset value you used?

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Sat Mar 22, 2014 2:51 pm

i set the offset in eeprom, if you align the nozzles with the y-axis there is no x offset.
Attachments
eeprom.PNG

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: dual e3d

Postby Eaglezsoar » Sat Mar 22, 2014 4:46 pm

Thank you for posting the numbers.

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Mon Mar 24, 2014 1:30 pm

here is something i made real quick to test slic3r

Image

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: dual e3d

Postby Eaglezsoar » Mon Mar 24, 2014 1:34 pm

I'd say you have your dual extruders working well.
Excellent job!

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Thu Apr 03, 2014 12:06 am

Printing some stuff

Sliced in s3d
Attachments
Screenshot_2014-04-02-22-04-33.png

User avatar
Tinyhead
Printmaster!
Posts: 440
Joined: Thu Jan 23, 2014 11:44 pm
Location: Manitoba, Canada

Re: dual e3d

Postby Tinyhead » Thu Apr 03, 2014 12:17 am

That's awesome! Looks super clean! Some of the other setups and results I've seen are nothing compared to what you've got running there.

User avatar
0110-m-p
Printmaster!
Posts: 456
Joined: Sun Oct 20, 2013 9:23 am
Location: Atlanta, GA

Re: dual e3d

Postby 0110-m-p » Thu Apr 03, 2014 11:43 am

That looks awesome. I'm assuming you used ABS for all the mounts? Seems like PLA that close to the nozzle/heater cartridge would warp really quick due to heat.
Current Machines || Rostock Max (V1) | V3DR ||
Previous Machines || Flashforge Creator Pro ||

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Thu Apr 03, 2014 6:34 pm

yar it is orange abs, you could probably get away with PLA, i would just wrap the heater blocks with insulation first.

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: dual e3d

Postby bubbasnow » Sat Apr 05, 2014 2:02 pm

alrighty so i have replaced my temp solution for the dual ezstruders with this.

Image

It fits in the standard holes but i had to drill 2 for the filament to feed down. i am also using some of those filament spool rollers using nylon drawer wheels
Image

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: dual e3d

Postby Eaglezsoar » Sat Apr 05, 2014 2:12 pm

Nice job!
Would you still have the stl for the dual ezstruder mount?


Return to “What are YOU making?”

Who is online

Users browsing this forum: No registered users and 1 guest