713 maker effector and hot end mount

Show off your latest creations, whether 3D printed or not
Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

713 maker effector and hot end mount

Postby Twac1 » Sat Aug 19, 2017 10:40 am

so has anyone purchased the effector and under mount kit for their he280? I got my parts this week from 713 super fast and everything looks nice. issue is I purchased what I thought I would need but am not sure if it is correct or will even work with a rebuild of the he280. Tips, pics, or any info would be great. I have sent numerous emails to 713 but they must be pretty busy.
Attachments
IMG_2399[1].JPG
my kit

User avatar
XpresoAdct
Printmaster!
Posts: 36
Joined: Thu Apr 17, 2014 5:41 pm
Location: Irvine, CA

Re: 713 maker effector and hot end mount

Postby XpresoAdct » Sat Aug 19, 2017 12:13 pm

That looks right. Usually there is a diagram to illustrate how to assemble. Let me try and get some photos for you.
-edit- Actually I think you have extra parts.
It looks like you bought a basic kit requesting SeeMeCNC locking ring. Red and Blue
Then additionally you bought the Accelerometer Board locking ring. Green
713maker partsGrouped.jpg


You do not need the parts in blue. At least, my kit did not include them because I selected "Accelerometer Probe" under locking ring choice.
At least that was only a $5 extra part you added.

I will attach photos of my installation.
Last edited by XpresoAdct on Sat Aug 19, 2017 12:29 pm, edited 1 time in total.

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: 713 maker effector and hot end mount

Postby Twac1 » Sat Aug 19, 2017 12:22 pm

that would be awesome!

User avatar
XpresoAdct
Printmaster!
Posts: 36
Joined: Thu Apr 17, 2014 5:41 pm
Location: Irvine, CA

Re: 713 maker effector and hot end mount

Postby XpresoAdct » Sat Aug 19, 2017 12:54 pm

I will edit and describe these when I get back to my workstation.
IMG_4126.JPG

IMG_4127.JPG

IMG_4128.JPG

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: 713 maker effector and hot end mount

Postby Twac1 » Sat Aug 19, 2017 12:57 pm

I just don't see how this acp board is going to work? the lock ring seems like if anything I will need some spacers ?
Attachments
IMG_2400[1].JPG

User avatar
XpresoAdct
Printmaster!
Posts: 36
Joined: Thu Apr 17, 2014 5:41 pm
Location: Irvine, CA

Re: 713 maker effector and hot end mount

Postby XpresoAdct » Sat Aug 19, 2017 1:03 pm

In your yellow bag there should be four spacers.
One goes on the top of each of those accelerometer mount, then the accelerometer, then 1 more spacer on the top of the mount hole with a pos and neg attachment.

IMG_4129.JPG

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: 713 maker effector and hot end mount

Postby Twac1 » Sat Aug 19, 2017 1:11 pm

am I even supposed to be using the old hot end?
Attachments
IMG_2401[1].JPG

User avatar
XpresoAdct
Printmaster!
Posts: 36
Joined: Thu Apr 17, 2014 5:41 pm
Location: Irvine, CA

Re: 713 maker effector and hot end mount

Postby XpresoAdct » Sat Aug 19, 2017 1:23 pm

Doh! Yup, that is an issue!

These mounts are for the E3D v6 hot end!

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: 713 maker effector and hot end mount

Postby Twac1 » Sat Aug 19, 2017 1:26 pm

10-4 was wondering lol. guess I am going to get a e3d v6 now. where at?

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: 713 maker effector and hot end mount

Postby Twac1 » Sat Aug 19, 2017 1:28 pm

and is it a good purchase?

User avatar
XpresoAdct
Printmaster!
Posts: 36
Joined: Thu Apr 17, 2014 5:41 pm
Location: Irvine, CA

Re: 713 maker effector and hot end mount

Postby XpresoAdct » Sat Aug 19, 2017 1:36 pm

I have E3d's on all my printers. I like them. They are an industry standard. Please stay away from cheap clones as they will provide no end of potential issues.

I get my E3D from MatterHackers.
http://www.matterhackers.com/store/prin ... ith-bowden

Sorry you got so far without catching this.
Some of my E3d prints

IMG_3993.JPG

IMG_3992.JPG

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: 713 maker effector and hot end mount

Postby Twac1 » Sat Aug 19, 2017 1:44 pm

hey no problem thanks for all your time and help! im going to give the e3d a shot, always love a new project for my v3

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1493
Joined: Wed Sep 23, 2015 2:55 pm

Re: 713 maker effector and hot end mount

Postby Xenocrates » Sat Aug 19, 2017 4:24 pm

I'm personally a fan of buying from E3D directly, since for me in Michigan, it somehow it cheaper with shipping and currency exchanges to get from them than from Filastruder, and faster than Matterhackers at around the same price. That said, I recomend getting yourself the whole nozzle fun pack, and possibly a Volcano starter set as well, so you can print from .25 to 1.2.
Machines:
Rostock Max V2, 760W corsair modular PSU, PT100 enabled E3D V6 and volcano, self adjusting carriages, Raymond style enclosure
Automation Technology 60W laser cutter/engraver

Sic Transit Gloria Mundi
01-10011-11111100001

Twac1
Printmaster!
Posts: 76
Joined: Sat Sep 24, 2016 8:19 pm
Location: Burlington ND

Re: 713 maker effector and hot end mount

Postby Twac1 » Wed Aug 23, 2017 9:18 pm

ok so I received the e3d, ordered the right spacers, and am ready to put it together. I have the V3, what do I need to change to make the e3d work? the thermistor is at 75 k ohms and the heater cartridge seems to be a 25 watt. im guessing firmware changes?

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1493
Joined: Wed Sep 23, 2015 2:55 pm

Re: 713 maker effector and hot end mount

Postby Xenocrates » Wed Aug 23, 2017 10:08 pm

You need to tell it to use the correct thermistor table ( Sensor Type 8), in the firmware's config.h file. Once that's done, run a PID autotune cycle, and that gets you pretty close to done.
Machines:
Rostock Max V2, 760W corsair modular PSU, PT100 enabled E3D V6 and volcano, self adjusting carriages, Raymond style enclosure
Automation Technology 60W laser cutter/engraver

Sic Transit Gloria Mundi
01-10011-11111100001


Return to “What are YOU making?”

Who is online

Users browsing this forum: No registered users and 5 guests