Deleted

Show off your latest creations, whether 3D printed or not
Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Deleted

Post by Holy1 » Sun Apr 10, 2016 2:47 pm

deleted
Last edited by Holy1 on Mon Apr 11, 2016 4:22 pm, edited 3 times in total.
Orion to Cartesian viewtopic.php?f=59&t=7808

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Check out the CoreXY Printer I have designed and built

Post by Holy1 » Sun Apr 10, 2016 3:42 pm

deleted
Last edited by Holy1 on Mon Apr 11, 2016 4:20 pm, edited 1 time in total.
Orion to Cartesian viewtopic.php?f=59&t=7808

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Check out the CoreXY Printer I have designed and built

Post by Holy1 » Sun Apr 10, 2016 4:56 pm

deleted
Last edited by Holy1 on Mon Apr 11, 2016 4:21 pm, edited 1 time in total.
Orion to Cartesian viewtopic.php?f=59&t=7808

User avatar
Windshadow
Printmaster!
Posts: 526
Joined: Mon Nov 30, 2015 6:35 pm
Location: Mid Coast Maine

Re: Check out the CoreXY Printer I have designed and built

Post by Windshadow » Sun Apr 10, 2016 5:23 pm

You seem to have it running very smoothly and the shrouds you have designed for it make it a very clean design

well done

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Check out the CoreXY Printer I have designed and built

Post by Holy1 » Mon Apr 11, 2016 8:44 am

Thanks Windshadow!
Orion to Cartesian viewtopic.php?f=59&t=7808

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Check out the CoreXY Printer I have designed and built

Post by Eaglezsoar » Mon Apr 11, 2016 12:51 pm

Well done indeed!
The cats you printed and I hope that are supposed to be cats look just like your avatar. Does someone
have a cat fettish? (you don't have to answer that because it is none of my business.)
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

Eric
Printmaster!
Posts: 726
Joined: Sat Aug 18, 2012 4:09 am
Location: Chula Vista, CA

Re: Deleted

Post by Eric » Mon Apr 11, 2016 5:25 pm

Holy deletions, Batman!

I'm sure you had your reasons. Just don't blame the cat!

Khalid Khattak
Printmaster!
Posts: 276
Joined: Thu Dec 11, 2014 12:50 am

Re: Deleted

Post by Khalid Khattak » Tue Apr 12, 2016 5:08 am

:oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :!: :!: :!: :!: :?: :?: :?: :?:

User avatar
joe
Printmaster!
Posts: 275
Joined: Tue Jun 28, 2016 10:05 pm

Re: Deleted

Post by joe » Wed Jul 20, 2016 10:05 pm

What happened here?

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Deleted

Post by Holy1 » Fri Jul 22, 2016 11:24 am

joe wrote:What happened here?
I was told via private message that this a delta forum.
Orion to Cartesian viewtopic.php?f=59&t=7808

User avatar
Windshadow
Printmaster!
Posts: 526
Joined: Mon Nov 30, 2015 6:35 pm
Location: Mid Coast Maine

Re: Deleted

Post by Windshadow » Fri Jul 22, 2016 11:30 am

Thats silly, this is what are you making it does not have to be made on a delta to go here... and I think SeeMeCNC did a cartesian printer when they first started out.The moderators will remove anything that is against the rules

if you are making it I think you should be able to put it here..... but then I am not a moderator so perhaps one of them will chip in

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1561
Joined: Wed Sep 23, 2015 2:55 pm

Re: Deleted

Post by Xenocrates » Fri Jul 22, 2016 11:33 am

How rude of them. It was a rather nice printer, and if they told you to take your toys and go home, I wish they had had the honesty to do it in public. I mean, I don't get bothered for having a cartesian laser cutter, Mike doesn't get hassled for using a cartesian for some multi-color work. No one has bugged people for building MPCNC's. Seems that it's inconsistent if it's an actual policy, or a rather fussy busybody

(That being said, I understand this forum is put together by SeemeCNC and intended for their community, and so a focus on their printers is the intended result)
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router

Sic Transit Gloria Mundi
01-10011-11111100001

User avatar
PartDaddy
Printmaster!
Posts: 350
Joined: Fri Mar 23, 2012 4:03 pm

Re: Deleted

Post by PartDaddy » Fri Jul 22, 2016 11:39 am

Fill me in here. Who moderated what.
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Deleted

Post by Holy1 » Fri Jul 22, 2016 11:43 am

PartDaddy wrote:Fill me in here. Who moderated what.


It was not from a moderator or from SEEMECNC.

I have 2 of their printers.
Orion to Cartesian viewtopic.php?f=59&t=7808

johnoly99
Printmaster!
Posts: 736
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN

Re: Deleted

Post by johnoly99 » Fri Jul 22, 2016 11:54 am

Hey Holy1,

We're (SeeMeCNC) not sure who messaged you and told you this is strictly a delta forum? We don't care who posts what on here, especially if it's something YOU MADE!!!! ;) The only thing we're against is the blatantly obvious spammy posts from people that their first post is a "hey look what i made, buy it here!" kind of posts. We don't want our community to turn into an advertisement site haha.

From all of us at SeeMeCNC HQ, please post back whatever it was you took down, as obviously a lot of guys were interested in it man!

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4928
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Deleted

Post by geneb » Fri Jul 22, 2016 11:59 am

Holy1, other printers are welcome here. Considering this is the General "what are you making?" board, then your printer is perfectly relevant. If someone doesn't like it, they can go pound sand. I think it would be cool if you'd re-post your printer pics.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Deleted

Post by Holy1 » Fri Jul 22, 2016 12:10 pm

Gee thanks everyone. I will certainly repost soon. I will send a pm to the person and tell them to "pound sand". :D
Orion to Cartesian viewtopic.php?f=59&t=7808

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Deleted

Post by Eaglezsoar » Fri Jul 22, 2016 12:35 pm

Holy1 wrote:Gee thanks everyone. I will certainly repost soon. I will send a pm to the person and tell them to "pound sand". :D


You are too generous with telling him to pound sand, that is not what I would be telling him but this is a public forum.
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

User avatar
Tincho85
Printmaster!
Posts: 659
Joined: Sun Nov 03, 2013 12:27 pm
Location: Buenos Aires, Argentina

Re: Deleted

Post by Tincho85 » Sat Jul 23, 2016 10:57 am

I won't lie, when I saw the "deleted" all over the thread it made me want to read it even more.
So, as an attempt to read it, I tried one of those web services that let you view a cached version of a page.

No luck with that, but I ended up playing with this page http://waybackmachine.org and found this:

nt.jpg


Maybe I'm too nostalgic, but I do miss the old looks.

Is there a way to change the background or to choose different templates for the current forum?
Please don't take it as a complaint, the current forum it's very clear to read and navigate, but I liked more the old one.
Martín S.

enggmaug
Printmaster!
Posts: 305
Joined: Wed Nov 13, 2013 3:54 am
Location: Antony, France

Re: Deleted

Post by enggmaug » Sat Jul 23, 2016 1:09 pm

@Holy1 I don't like cats much, but hey, I wanna see what you did on your cartesian !

@Tincho85, there is a way : in your profile settings, you can set your board style under the "board preference" tab.

User avatar
Tincho85
Printmaster!
Posts: 659
Joined: Sun Nov 03, 2013 12:27 pm
Location: Buenos Aires, Argentina

Re: Deleted

Post by Tincho85 » Sat Jul 23, 2016 1:24 pm

enggmaug wrote:@Holy1 I don't like cats much, but hey, I wanna see what you did on your cartesian !

@Tincho85, there is a way : in your profile settings, you can set your board style under the "board preference" tab.


Many thanks!!!!
Now using Digi board style and I love it :D
Martín S.

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Deleted

Post by Holy1 » Sat Jul 23, 2016 1:30 pm

I'm not much of a cat person either but the model is a good challenging print with overhangs and nice smooth rounded shapes.
Orion to Cartesian viewtopic.php?f=59&t=7808

3D-Print
Printmaster!
Posts: 519
Joined: Mon Jan 05, 2015 9:39 pm
Location: Omaha, Nebraska

Re: Deleted

Post by 3D-Print » Sun Jul 24, 2016 11:18 pm

Whom ever mentioned deleting...... has an issue.

Agree that the best part of the forum is to "witness" what everyone does! We learn from experience. Bias is only limiting and blinding!
My 3D-Printing learning curve is asymptotic to a Delta's X, Y and Z-axes

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Deleted

Post by Holy1 » Mon Jul 25, 2016 9:15 am

Here are some pictures of my little CoreXY (Bob). It has a build volume of 6 x 6.5 x 8"



[
Last edited by Holy1 on Wed Jul 27, 2016 7:46 am, edited 2 times in total.
Orion to Cartesian viewtopic.php?f=59&t=7808

Holy1
Printmaster!
Posts: 349
Joined: Fri Jan 24, 2014 12:53 pm

Re: Deleted

Post by Holy1 » Mon Jul 25, 2016 9:49 am

Here is a couple more pics and not so good shaky video
Last edited by Holy1 on Wed Jul 27, 2016 7:47 am, edited 1 time in total.
Orion to Cartesian viewtopic.php?f=59&t=7808

Post Reply

Return to “What are YOU making?”