Possible error in photograph

Here's where you can find the official (and unofficial too) things like assembly instructions etc...
Post Reply
User avatar
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Possible error in photograph

Post by Eaglezsoar » Sun Jan 10, 2016 2:34 pm

Gene, I was looking at the latest V2 manual,

Assembly Guide for the Rostock MAX v2.0 3D printer.
Version 4.14, December 29th, 2015

Fig. 18.1-3: Installing the LCD panel.

The above figure shows the LCD cables and one is plugged in with the red to the right which is correct and
the other is plugged in so that the red is connected to the left. My old eyes could be wrong but if I am correct
this could cause confusion and a non working LCD. All the photos previous to this one appear to be correct so
I could be picking nits.

User avatar
Posts: 4954
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA

Re: Possible error in photograph

Post by geneb » Mon Jan 11, 2016 1:39 pm

Good eye, Eagle. I'll take a look at my machine this week and see if I derped it and need to re-shoot that photo.


Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

Post Reply

Return to “Rostock MAX Official Docs”