Rostock Max 2 Effector Plate Drwaing

Here's where you can find the official (and unofficial too) things like assembly instructions etc...
User avatar
D-G-C
Plasticator
Posts: 18
Joined: Sun Sep 27, 2015 3:43 am

Rostock Max 2 Effector Plate Drwaing

Postby D-G-C » Sun Apr 17, 2016 7:59 am

I was looking at githup for the effector platform drawing but I couldn't find it. Where do I find it or how did you name it?

Thank you in advance for the help

User avatar
Xenocrates
ULTIMATE 3D JEDDI
Posts: 1532
Joined: Wed Sep 23, 2015 2:55 pm

Re: Rostock Max 2 Effector Plate Drwaing

Postby Xenocrates » Sun Apr 17, 2016 9:45 am

I remember having trouble finding it. Search for platform. If it's the ball joint one you're looking for (It's for relatively new, or retrofitted printers, unlike the U-joint platform) I've attached it to the post.

Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router

Sic Transit Gloria Mundi
01-10011-11111100001

User avatar
D-G-C
Plasticator
Posts: 18
Joined: Sun Sep 27, 2015 3:43 am

Re: Rostock Max 2 Effector Plate Drwaing

Postby D-G-C » Mon Apr 18, 2016 6:31 am

Thank you for the file but I am looking for the old effector platform.
What I really need is the distance of the three arms let say to the centre. I have in mind to make e sensor which is direct under the nozzle for the OpenDACT software. I would clip it on for the calibration, what normally isn't necessary often, and remove it for the printing. So I would be sure I measure the hight on the right place.
Attachments
IMG_3483.JPG
Effector Platform

gchristopher
Printmaster!
Posts: 174
Joined: Mon Dec 08, 2014 2:09 am

Re: Rostock Max 2 Effector Plate Drwaing

Postby gchristopher » Mon Apr 18, 2016 2:42 pm


User avatar
bvandiepenbos
Printmaster!
Posts: 927
Joined: Thu Apr 05, 2012 11:25 pm
Location: Goshen, IN
Contact:

Re: Rostock Max 2 Effector Plate Drwaing

Postby bvandiepenbos » Mon Apr 18, 2016 9:36 pm

That version of platform is 33 MM from center to center of axle. The older ones are the same.
New ball-cup platform is 30 MM
~*Brian V.

RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"

User avatar
D-G-C
Plasticator
Posts: 18
Joined: Sun Sep 27, 2015 3:43 am

Re: Rostock Max 2 Effector Plate Drwaing

Postby D-G-C » Wed Apr 20, 2016 7:28 am

Thank you for the help and the link. This is what I needed. :D


Return to “Rostock MAX Official Docs”

Who is online

Users browsing this forum: No registered users and 2 guests