Duet wifi extruder wiring confusion

Having a problem? Post it here and someone will be along shortly to help
buggy
Printmaster!
Posts: 63
Joined: Sun Jan 17, 2016 8:05 pm
Location: everett, washington

Duet wifi extruder wiring confusion

Postby buggy » Fri Jan 26, 2018 7:38 am

Hey everyone so I finally decided to pull the trigger and bring my Max v2 up to date with upgrades. Got my Duet wifi and titan extruder yesterday and im still waiting to get my fsr kit with the tricklaser fsr plate.

Everything went pretty smooth with the upgrade process except i cant figure out how to properly wire the titan extruder stepper motor for the duet. here is the link to the data sheet for the pancake stepper motor used on my titan extruder. https://wiki.e3d-online.com/images/2/2e/E-MOTOR-NEMA17-ALL_PUBLIC.pdf

Here is the wiring diagram for the duet wifi. https://duet3d.com/wiki/Duet_WiFi_and_Ethernet_wiring_diagrams

is this how it should be wired?
motor.jpg


I havent had time to trouble shoot the wiring yet since it was late at night and now i have to go to work. Any help would be greatly appreciated!

Dan.

User avatar
Khayrisill
Printmaster!
Posts: 65
Joined: Thu Aug 25, 2016 9:09 am
Location: Montréal, CA

Re: Duet wifi extruder wiring confusion

Postby Khayrisill » Fri Jan 26, 2018 2:14 pm

Hi buggy,


nop should be like this B-= Black B= Green A= Blue A-=Red

Untitled.png
Untitled.png (4.85 KiB) Viewed 447 times

buggy
Printmaster!
Posts: 63
Joined: Sun Jan 17, 2016 8:05 pm
Location: everett, washington

Re: Duet wifi extruder wiring confusion

Postby buggy » Fri Jan 26, 2018 2:25 pm

Thank you for the response! I will try this when I get home, in hind sight i should have wired it that way first lol


Return to “Troubleshooting”

Who is online

Users browsing this forum: No registered users and 4 guests