Top Layer

Having a problem? Post it here and someone will be along shortly to help
Post Reply
User avatar
tcat007
Printmaster!
Posts: 67
Joined: Thu Nov 26, 2015 1:19 pm

Top Layer

Post by tcat007 » Sat Jul 30, 2016 6:02 pm

Just ran a part (lounge chair coaster) I created in FreeCad and G-code created with Slic3r. The surface with the "C" is flat, yet it printed very rough with oddball "tracks". Would I be better off trying Cura, or different settings? .2 layers, 3 solid Top/bottom layers, 25% infill honeycomb concentric. Suggestions?

PS: Don't order Hatchbox dark brown if you don't want dark purple! Exchanging this roll for black.
Attachments
IMG_20160730_162502~01.jpg

Qdeathstar
Printmaster!
Posts: 622
Joined: Wed Apr 13, 2016 7:42 pm

Re: Top Layer

Post by Qdeathstar » Sat Jul 30, 2016 8:11 pm

It kind of looks like you are overextruding a little bit.

Post Reply

Return to “Troubleshooting”