Artifacts on printed objects

Having a problem? Post it here and someone will be along shortly to help
Post Reply
ed733
Noob
Posts: 1
Joined: Sat Sep 07, 2019 10:57 am

Artifacts on printed objects

Post by ed733 » Sun Sep 08, 2019 12:37 pm

Hi everybody,
I own a new V4 with carbon arms. Duet firmware 2.02.
Dual matter upgrade installed. Cura 4.2.1 being used.
On all my prints, I have this ugly artifacts even when I change the PLA Brand, temp or speed. (Retraction also has been tested without success)
Any Idea ?
Thanks
20190907_164050.jpg
Layers at 0.2, nozzle 0.4, PLA at 50 mm/sec , 195° and bed at 50.
20190907_164106.jpg
Fans also at 100%

Post Reply

Return to “Troubleshooting”